A simple tutorial with MP3 or WAV producer sound ringtones

Tutorial

　　Foreword: Many friends all like the vocal ring, after all, the simple chord bell is still monotonous some. But it is limited to the complexity of the production, and there is no good tutorial to make their own ringtones. Now I put the method of making a simple, I believe that the software to start fast friends after watching it can make their own ringtones.

(although now have pcsync software, can very simple produce the MMF human voice, but because the upper limit is only 200K, and is a fixed 16000 sampling, if want to make a small bell can not, so limit the use of large or small ringtones)

First, explain the steps you need:

1, the sound sampling;
2, adjust the length of the single PCM template MIDI to match the length of the sound;
3, the adjustment of the MIDI load sound to synthesize the MMF ringtones.

The first step: The sampling of sound sources

Need to download cool Edit Pro 2.0 and Sound Forge 6.0, these two software online a lot, you can go look for.

This step is very important, the sound of the cutting is just to see this step. This step, of course, is the most tedious step. The required software cool Edit Pro or Sound Forge These two are more practical. Cool Edit Pro is only introduced here, the latter is also very convenient, like people can try their own. "The proposal does not use the Chinese, because after the Chinese, will have the software use the bug"

Run cool Edit Pro software, open the sound source, where the general use of WAV or standard MP3 (note: Non-standard MP3 open, will appear a dialog box, let you choose frequency depth and so on; suggest first use software bar MP3 convert to WAV and then open! ）。 When opened, the following figure is seen

I have described the buttons and notices that are commonly used, and pointed them out with arrows. Choose the one you are going to make the ringtone, you can zoom in with the Zoom button to see it clearly. Select a good, in the selected waveform on the right click to select Copy for the new, the following figure.

After you copy it to the new, you can sample it. Click the sample button (already indicated on the figure) for sampling settings, 40-chord sampling rate can only choose 8000, 11025, 160,003 formats, you must select Mono, sampling depth can only choose 16! Then select OK to sample. When finished, choose Save As Can! Sample settings are shown below

In addition, the software in the lower right corner of the 6 time to do a description: as shown

The first row is from left to right: The start time of the selection, the end time of the selection, and the length of time for the selection;

The second line is from left to right: The start time displayed by the current window, the end time displayed by the current window, and the length of time displayed by the current window.

Step Two: The length adjustment of the single PCM template MIDI

Use the Cakewalk SONAR or Cakewalk Music Creator Pro24 2004 software to adjust a single PCM template MIDI track, because I use the latter, so here is the use of the latter, in fact, the former is also similar usage. There is hardly much difference in operation.

Run Cakewalk Music Creator Pro24 2004 software to open that single PCM template MIDI track. Then click on the File menu (files) to select the Audio in Import ... To import a good WAV file.

Then click on the waveform, click on the track 2, and then click on the piano shutter, as shown below

In the appearance of the Piano shutter window can be seen on the upper row of black, that is the length of the waveform file. Generally just download the single PCM template MIDI is a lot of blocks, must use the eraser first to remove the superfluous, leaving a C0 in the front, and then click the arrow, pull it to 1 position, and then click on that Track right button, pop-up track length adjustment window, as shown

In the track adjustment window can see a lot of options, do not need to move, as long as the number in the Duration can be modified, the original number is the proportion, some people think also must enter the proportion of the number, in fact, no need to enter 4-digit or 5-digit number can be. Try as much as you can. The length is just a little longer than the black part above. The following figure

Set, turn off the piano shutter, and then in the location can see the length of the MIDI track may still be different from the original, that as long as the mouse to pull short on it. The following figure

When all is done, delete the waveform file and then save the MIDI audio track, delete the following figure

Step Three: Single PCM template MIDI loaded WAV waveform merged to generate the MMF file.

ATS-MA5-SMAF software also needs to be downloaded.

This can only be done with the ATS-MA5-SMAF software provided by YAMAHA for the merging work. The latest version of the software is already in Chinese.

Run ATS-MA5-SMAF software, first set: Click the "Options" menu, choose "Preferred" to set up the window, in the "at Mode" select "MA-3", "Content mode" select "FM32", in the "Reserve PCM Stream" select "2 Voice Reserved" , others do not have to make changes, then click OK, the following figure "here with the setting of 40 chords as an example, another note: The new version of the MA5 has no" reserved PCM flow "option, then do not have to choose. 】

Open a single PCM template MIDI, then click on the "Window" menu of "PCM Flow distribution Map" can also directly click on the tool button below, pop-up PCM flow Distribution Diagram window; Click the right mouse button in the FS-1 position, select "New" Import do a good WAV waveform file, and then click Save! The following figure

Well, a human voice ringtone is done, and quickly double-click to listen to it, hey.

Additional explanation: The problem of noise reduction is more difficult to say, can only rely on your own thinking. You can use the cool Edit Pro self-band noise reduction. can also use t-racks or izotope ozone to sample good WAV for quality processing.