A tutorial on the painting of the Desert Eagle pistol

Tutorial

the tutorials are longer and seem to be patient! Of course it takes more patience to draw.

http://www.flash8.net/bbs/UploadFile/2005-5/2005511125224799.swf

source File Download

First, let's take a look at the structure of the Desert Eagle.

Because of the powerful power and small shape of the Desert Hawk, the appearance of the eagle differs greatly from that of other conventional pistols.

The muzzle of the Shah is generally large, and the following is a cone-shaped structure.

Shah uses the rifle firing principle to shoot bullets, which makes the firing pin a lot longer.

The firing pin is special so that it can be loaded and pulled farther than the conventional pistol length. (Of course, this can also alleviate the strong recoil of the sand Eagle)

The Shah volume is larger than the conventional pistol, the Forcipomyia loaded with bullets is about 2 kg heavy, without professional training is not flexible use of it.

These are the Shah Forcipomyia ~ ~ ~ ~ ~
Well, knowing about the Desert Eagle, let's start drawing it.

The painting tool is flash7.0. (What do you have?) It's not too soon to install it.

The 1th step depicts the outline of the Shah with the line tool.

The curve section can be used to draw a straight line into a curve with a selection tool.

OK, the outline of the Shah has been sketched out.

Of course don't forget the details ~ ~ ~

As with the sketch, first divide the general light and shade out.

This is where I use the flash gradient radial coloring tool that uses multiple gradients to paint a metallic sense.

You need to get a better look at this step.

Take the next step and remove the extra parts.

Use the same method to paint the trigger piece.

The treatment of the insurance buckle, first add a block gradient.

And then button off the parts.

Plus the brightness and lustre from the muzzle to the insurance buckle.

The drawing of the handle part

Again, get rid of unwanted parts.

Don't forget the gloss handle at the turning of the handle.

Now I'm drawing the stripes on the loaded buckle, it's simple, draw the light and paste it in one copy (note the angle and length)

See how it works now? Haha, it is very beautiful ~ ~ ~ but still not finished ~ ~ ~

Because there are some details to deal with, for example, there is a turning point ~ ~ ~

Here also has the transition, the transition is manifests the metallic luster feeling the best position, therefore the color must grasp well.

Details! Details! Never ignore the details!

Shadow processing is handled through transparent values.

The treatment of the shadow of the insurance buckle ~ ~

Handle the shadow of the trigger file ~ ~ ~

After the treatment of the shadow of the needle ~ ~ ~

After the shadow to see the effect ~ See there are missing ~

All things have yin and yang, after the shadow, don't forget the high light.

In fact, the high light is very simple, is to draw 22 gradient white line to the turning point of a stick on the OK.

Now, we have to deal with this handle, it is rubber products, gloss and metal is not a grade, so the contrast of the gradient is not so big.

Add dot decoration not dull (I.M.I logo Israeli army factory mark)

OK, the coloring is done, and the most important step is to turn all the contour lines into fill graphs.

Because this can make the picture in the zoom out of the line can also be enlarged and reduced together.

Finally add the text decoration and shading, it is done.

This is the finished effect chart!

Final statement, only for study and use, strictly prohibited for commercial use!