What tools do not use a network cable can easily achieve multiple computers synchronized Internet access
1, first of all, select one of the notebook computer as the host, the host needs to be normal with the network cable connection, that is, the normal Internet.
Open the host's network connections, select Wireless network Connections, right-click on the Properties dialog box, under the General tab, double-click TCP/IP protocol, and configure the IP address and subnet mask as follows: 192.168.0.1 and 255.255.255.0 (as shown in figure), The others do not need to be set.
Figure I
2, then, click on the host's Wireless Network connection Properties Window "Wireless network Configuration", select "Configure my wireless network settings with Windows", click "Advanced" below, and on the network you want to access, tick "computer to computer only (pending)" and do not check "automatically connect to a non preferred network." As shown in Figure II:
Figure II
3, third, in the host "Wireless Network Configuration" tab, the preferred network, click "Add" to add an SSID for the host. A combination of letters or numbers, such as abc123; network authentication: Open; Data encryption: WEB; network key: You can enter 5 or 13-bit ASCII characters or 10-or 26-bit hexadecimal characters; do not check the "automatically provide this key for me." As shown in Figure three:
Figure Three
4, four, configure the host's broadband dial-up connection properties Advanced, check "Allow other users to connect through the Internet on this computer" and "establish a dial-up connection whenever a computer on the network attempts to access the Internet." As shown in Figure four:
Figure Four
5, five, in the second (or more) as a computer notebook, configure the wireless network card properties for automatic access. Then in the available network search can be found just the host set SSID network, double-click, enter the password, you can connect successfully, the realization of wireless LAN sharing Internet.