One, I use the various parts:
(1) Raspberry Pi
(2) SD card
(3) Cable
(4) Router
(5) a notebook
Second, download http://www.raspberrypi.org/downloads from the official website, I download is Raspbian Jessie
Third, the Raspbian burned to the SD card, I was in Windows under the operation:
Download the Win32diskimager and burn the Raspbian image to SD card;
Iv.. Insert the SD card into the Raspberry Pi SD card slot
Five, the Raspberry Pi and router with a network cable connection. I'm using Ipscan. View the IP of the Raspberry Pi
Six, with the software login, I use putty. At this time to enter the user name and password, first input pi, enter, in the input raspberry and then enter, you can enter the Raspberry Pi Execution Command interface, the first run system he will be reminded to run sudo raspi-config, this can be run first, without changing any settings, in the exit, and then, In the case of a router with a network input: sudo apt-get install xrdp download good after the line.
Seven, exit putty. Win7 on the desktop right-click on the computer, properties,
Select "Remote Settings"
Check "Allow Remote Assistance to connect to this computer" below "Allow computers running any version of Remote Desktop to connect (less secure)" checked, others do not care about it.
Eight, the operation of input mstsc return on the line, and then fill in the Raspberry Pi Deip
Nine, the name of the pi password for raspberry
Ten, success
A no-screen installation of the Raspberry Pi tutorial