A perfect tutorial on vro configuration of ADSL cat

With the development of China's communication industry, vrouters play an increasingly important role in it. Here we mainly explain some methods and steps about vro settings, and hope to help you. Now, you are most concerned about routing. Now I will introduce you to the vro setting method and the vro setting of the NIC TCP/IP protocol.

1. Right-click "Network neighbors" on the desktop and select "properties" from the pop-up menu ".

2. After the network dialog box appears, under the "configuration" tab, select "TCP/IP ......" (The ellipsis varies depending on your computer's network adapter.) Click properties ".

3. The "TCP/IP properties" window is displayed. In the "TCP/IP properties" window, select the "specified IP Address" option on the "IP address" tab. Enter the IP address of the NIC, for example, 192.168.1.14 and 255.255.255.0 as the subnet mask. (The IP address used in this example is the same as the Factory Address of ADSL. You can set the adsl ip address on the configuration screen as needed ).

4. Select the "Gateway" tab, enter the gateway IP address 192.168.1.1 (which is the default address of ADSL), and click "add ". 5. Select the "DNS configuration" tab and select the "Enable DNS" option. In the "DNS server search" sequence bar, enter the IP address of the DNS server and click "add" to add it. The above settings are for the WIN9X system, and the WINNT system looks down! Step 2: The "TCP/IP properties" window is displayed. In the "TCP/IP properties" window, select the "specified IP Address" option on the "IP address" tab. Enter the IP address of the NIC, for example, 192.168.1.14, subnet mask 255.255.0, and Gateway: 192.168.1.1. This is the default value of Modem.) enter the IP address of the DNS server. The following is a summary!

6. Click OK to return to the "network" dialog box.

7. click the confirm button in the network dialog box to exit 9X system to restart the machine, NT system does not need) suitable for DB102 DB102-A DB108 router setting method after just set the network card, open your browser and type http: // 192.168.1.1; in the address bar ;. Enter the User Name admin and password dare.

WAN router settings

1. 1-7 "virtual circuits" are closed. Here, we take the 1 virtual circuit as an example. The method is to select 1 in the "virtual circuit" in the "WAN" Settings and press "Submit ", select "enable" and "NO", and then press "Submit" to complete the process. The other items also do the same.

2. Set "enable" of the 0 virtual circuit to "Yes ".

3. Set the VPI and VCI values to the local telecom ).

4. For dynamic routing, select "PPPoE LLC" in "Encapsulation Format", and for Static Routing, select "1483 Bridged ip llc" in "Encapsulation Format ".

5. Select "Disabled" in the "bridge" option ".

6. for dynamic routing, enter "User Name" and "password" in the PPP "User Name" and "password" columns (the specific value is specified by the DSL service provider) for Static Routing, enter "static IP Address", "subnet mask", and "Default Gateway" (the specific value is specified by the DSL service provider ).

7. Click "Submit" in the lower part of the page to save the setting value.