A simple and practical solution for using a collaborative communication dial to share the Internet

Recently, many users in collaboration with the dial handler have asked me how to use my holytelecom to crack the patch and share the Internet with others. In fact, sharing the netbook with others is a feature of the operating system, however, the collaborative communication dial has disabled this function, and many people are not familiar with ICS (Internet Connection Sharing ). Therefore, we can't start with holytelecom.

I know several methods for Internet sharing:

1. You can use a vro to dial up the Internet.

2. Wireless Network Card sharing. This method is used by most cainiao. I will not talk about it If I search many posts online. This method is shared bandwidth and requires an additional wireless Nic for both the host and the slave, which is often not stable, the only advantage of this method is that the geographical location of the two machines within the signal range is unrestricted.

3. VPN. This method is also used by many people. This method can be used for remote virtual dial-up sharing on the campus network. I have not tried the campus network yet, but I still feel that at least two NICs are needed for implementation, if it is lan sharing, this method is a little complicated and difficult for ordinary students.

4. You can use a vswitch or crossover line (you can also use a vro or a wireless route, but in the final analysis, the crossover line function is still used)

In fact, the role of a switch is nothing more than the cross-line function, that is, to interconnect the computer from the master computer, but the switch can connect the master computer through a nic and multiple slave computers.

 

The specific method is as follows:

The first step, remove the collaborative communication dial share restrictions, the method is to copy the holytelecom (http://download.csdn.net/source/2240718) to the dial installation directory, run, and then click the crack button, after completion, click the shortcut of the dial on the desktop to start the dial and connect to the Internet.

Step 2: Set the connection established by the dial to share, right-click the connection established by the dial to ghcappoe (), and click share. Check the first and third options. Note that the dial is encrypted, the second option cannot be selected. Click OK. In the displayed window, select all.

Step 3: Check and set the local connection, right-click the local connection, and set the properties as follows:

Note that the DNS server address here is related to your region. Open a command prompt on the machine that can access the Internet normally. Enter ipconfig/all to view the DNS address. Enter ipconfig/all to obtain the following result.

After setting the local connection, click OK to exit.

Step 4: Set the slave machine. The slave machine only needs to be in a LAN with you and set the local IPv4 connection attribute as follows:

Note that the default gateway of the slave machine is the IPv4 address of the host, and the IP address of the slave machine must have a network segment with the host. In addition, you sometimes need to set DNS (the DNS setting method is the same as the host DNS setting method ).

 

So far, you should be able to access the Internet on the slave machine. If not, check the previous steps and compare them with me to restart the host and slave machine,If you cannot access the Internet, right-click my computer-computer name to ensure that the host and slave are in a working group.

After checking that the settings are successful, enter Ping Baidu.com on the command line and the following screen will show that the slave machine can access the Internet. If the web page cannot be opened, it is your IE problem.

Postscript:

The reason why I want to share Windows 7 with XP is that it is easier for XP to share the Internet with other systems and does not need to be set for working groups. However, sharing Windows 7 with other systems may fail.

In addition, the local IP address can be any one, so you only need to change the default gateway to choose to access the Internet through the host or dial by yourself (delete the default gateway and you can dial independently ), now, we all know that after two and a half hours, the dial can be used by other machines. You can set up only one account for a few people. If no one uses the account after each startup, set the default gateway to the IP address of the other party and access the Internet directly. Wait for two and a half hours before dialing.