A smart use of production tools to achieve a USB disk installed Windows system

preparatory work:

A, Windows CD-ROM or iso-mirrored file (in the case of ISO, a virtual optical drive is also required).

Second, WinToFlash this type of u disk production tools.

Third, prepare a at least one GB of u disk, backup data, because the production process will format the U disk.

　　Start work:

First, insert the system CD or virtual disc, I use the ISO, virtual optical drive.

Second, after downloading good wintoflash, decompression, into the WinToFlash directory, the implementation of WinToFlash.exe.

Third, set the format of the U disk parameters.

Set the optical drive letter of the Windows installation file and the letter of the U disk. Here the G disk is the virtual CD drive letter. Start to create to the U disk.

Five, after the creation, with U disk boot system, select USB-HDD mode (BIOS settings), you can see the following, select 1st, installation system.

Six, in the red box where you can see the size of the U disk is 2GB, the hard disk is 40GB, the 40GB hard drive to create a partition system bar. After the file is copied, you will be prompted to reboot, and you need to set this boot up with your hard drive. To remember.

Seven, set the computer name and administrator password installed, after entering the system to see the effect. The system installed is Windows 2003, and then the computer name and administrator password are set.

Once the installation is complete, enter the system again and you will see the effect after the system is installed. That's what we're going to teach you today. Using the mass Production tool WinToFlash to install the Windows system on U disk, of course, there are many kinds of use U disk installation system method, if you are interested in this, you may wish to be in the system of the home of the U disk tutorial more digging, I believe you can find more you do not know the U disk installed system skills.