A summary of WiFi test points for mobile terminals

1.wifi function test :

Verify that the corresponding functions of the WiFi module settings (such as adding APS, static IP and dynamic IP settings, etc.) are normal;

2. Special test of WiFi characteristics:

1)WiFi open speed or search Speed test: Verify that Wifi,wifi open speed or search speed test compliance requirements;

2)WiFi signal strength test: Test WiFi signal strength in different locations (such as: x meters from the accessibility of the AP, barriers (such as: Isolation of a wall, wall), etc., testing the WiFi signals with the distance of the change or the ability to wear obstacles Test tools: WiFi detection tools (such as: WiFi analyzer);

3) test WiFi transfer Rate test: test the WiFi transmission speed in different locations, respectively (test tool: WiFi analyzer)

4) testing competitive data transfer for WiFi: device and mobile

5) test the WiFi sleep test: Verify that WiFi is working when the system is shallow or deep asleep ;

6)wifi stability test: Test WiFi in the long-time data transmission process is abnormal;

7)AP Switch test: Test equipment in the signal-free zone to the signal area of the connection speed, re-connect if there is an abnormal;

8)roaming between WiFi and AP test: Test WiFi in different locations under the same name under the same password can be toggled (i.e.: when moving from AP1 position to AP2, moving : AP1 signal is getting weaker, AP2 signal will be more and more strong, the device will be based on the roaming mechanism to quickly switch, if not roaming, WiFi will be opened with 1 APs connected to another 1 APs, which leads to frequent disconnection or a large number of drops in the data process, this scenario is mainly used in enterprises or hospitals, etc.

9)WiFi anti-jamming test: test and WiFi its related hardware modules (such as: WiFi and Bluetooth shared 1 antennas) whether it caused interference, such as abnormal may occur WiFi can not open, data transmission rate is very low;

WiFi interactivity test: whether there is a problem with the use of the main test and the hardware module (for example: WiFi download, Bluetooth transmission, call , etc.)

WiFi Power consumption test: Test the power consumption of WiFi in different scenarios (such as: Download power, upload power, roaming power, standby power, etc.) is within the defined range, if the power consumption is high, it may cause the device to consume very quickly.

WiFi Leakage test: The main verification of the device after the shutdown, WiFi is dormant, the device after the WiFi and use, and then by the power and voltage when the device shuts down for a period of time (such as: 8 hours) after the power or voltage, if abnormal, When the device is switched on again, the battery level will decrease significantly.

A summary of WiFi test points for mobile terminals