A tutorial on computer-connected TV methods

1. Play the video on the computer on the TV without affecting the use of the computer.

2. The screen to achieve high definition of DVD, in the large-screen TV to enjoy. Installation simple 30 seconds to fix!!

3. Can lie comfortably on the sofa to watch the film. Unlimited number of online sources, but also eliminates the purchase of disc costs!! You can watch the movie with the whole family. Or wife watching soap operas, you continue to chat online!

High-definition movies/TV on the Internet, no need to look at the monitor, lying in bed looking at the TV, comfortable, at the same time, the computer can also surf the internet, play games.

The first is the purchase of computer-connected TV dedicated audio and video lines, length specifications are: 1.8 meters, 5 meters, 10 meters, 15 meters and 20 meters, and so on, everywhere there are sold here will not do detailed introduction

First step: Connecting Hardware

1, S-Terminal video cable Connection

The S terminal line is inserted into the S terminal port on the video card, while the other end of the S terminal line is plugged into the S terminal port on the rear of the TV set. The connection is complete (figure 1); If your TV does not have an S terminal, you can use the "S-av adaptor" provided by our shop, and connect its S terminal head with S terminal line. The AV head on the other end is then plugged into the AV video input port behind the TV, and is connected (Figure 2).

2, the connection of the audio line

The two Lotus heads of the audio line are inserted into the left and right channel audio input of the TV, and the 3.5mm audio head of the audio line is plugged into the audio output port of the sound card, and the connection is completed.

If you need to use "one point two audio frequency divider line", then its 3.5mm audio head into the audio output of the sound card, speakers (headphones) and audio lines are inserted into the "one point two audio frequency divider line" 3.5mm mother, the connection is complete.

Step two: Turn on the TV

After the hardware is connected, the TV must be turned on before the computer can find the hardware of the TV after the next computer starts.

Step three: Start the computer

If you are connected to the TV after the computer is started, you must first turn on the TV and turn the TV into AV1 or av2,av3 or S-terminal video mode (the names may be different for each TV), restart the computer, and let the computer find the hardware of the TV set. Otherwise, the setup options may not be found in the next video card setup

Fourth step: Set the graphics card one, NVIDIA video card settings

If you find that your graphics settings interface is different from ours, please upgrade the driver first. Download the driver.

1, open the computer, the right mouse button point desktop, in the pop-up menu select "Properties."

2, in the pop-up "Display Properties" window select "Set-Advanced", go to the next dialog box

3, click on the "GF5200" (depending on the graphics card different content will be different), such as the figure by the order of the label sequence to set, and finally click Apply.

4, according to the chart of the label sequence to set, and finally click "OK", set up.

Second, the ATI video card setup

If you find your video card settings interface different from ours, please upgrade the driver download driver first.

1, the mouse point on the desktop point right, select "Properties-Settings-Advanced", in the "display", the appearance of the following figure, and then click the "Apply" button.

2, choose "Overlay", click "Theatre mode Option"

3, choose "Theater Mode", "Full Screen", "4:3" (If your home TV is wide screen to choose 16:9)

4, click "OK" exit, set up.

Fifth step: Play the movie

At present, most players can be minimized in the state to ensure that the TV screen, but a small number of software will be minimized, the screen on the TV will be fixed. This behavior occurs when you zoom out of the viewer's window and drag it to a corner.

It is recommended to use the Storm Audio (KMPlayer) player, even if you minimize it and the TV is still full screen playback, set the method as shown below:

If you have only one sound card, then you play on the computer music or play the sound of the game will also be uploaded to the television, the solution is very simple, 30 yuan and then add a PCI sound card, and then the TV audio signal line to the sound card, the computer speaker plug to the motherboard from the board with the sound card. Use storm audio and video to play movies, view/option/output/directshow audio, select your PCI sound card to output, so that the sound of the movie will only be uploaded to the TV, and not to the computer speakers.

Then turn on the control Panel, sound and audio device properties/Click on the "Audio" tab/select the motherboard onboard sound card in the "sound playback" default device, which ensures that the computer speaker receives the signal normally. In this way, we can truly not interfere with each other, to achieve the perfect state.

FAQ 1. My video card is a 4-hole, 7-hole or 9-hole s-terminal

A: For the 4-pin, the 4-hole, 7-hole of the S-terminal hole are applicable. Can be directly inserted in the 4-hole, 7-hole S-terminal graphics card, 9-hole s terminal also need a switch to use.

2. What is the use of one point two audio frequency divider line?

A: A number of sound cards have only one sound output hole, through this one point two audio frequency divider line, can become 2 output jack, so that the computer speaker Plug and computer connected to the TV dedicated audio line of the audio plug can be inserted in the sound card at the same time.

3. What do I do without the S-terminal interface on my TV?

A: s terminal to the AV conversion head, this conversion head is to solve the TV set has no S terminal problem, the adapter to buy a separate 10 yuan or so, and the computer to connect the line of sight matching purchase, just 6 yuan.

4. My Video card property settings do not use the options in the instructions what to do

A: This behavior occurs because you do not have the latest graphics driver installed, please download the appropriate graphics driver.

5. The line is properly connected, but the TV has no image and sound

A: Please make sure the video card is set correctly and whether the TV channel has been tuned to AV1 or av2,av3 or S-terminal video mode

6. Why the image shown on the TV is Black-and-white or the sharpness is very poor

A: Please upgrade your graphics driver first, reset the video card. It may also be due to the television format, please select the TV format "Automatic", and then set the TV format in the video card as "pal-d", if the problem is not resolved, choose a different TV format to try, until the picture is normal.

7. When the player is minimized, why is the screen displayed on the TV frame

A: At present, some players can be minimized in the state to ensure that the TV screen to play properly, but a few of the software will appear minimized, the TV display on the frame. such as: qqlive online playback software, etc., so this phenomenon is normal, it is recommended to use the "Storm audio and video" player, view the settings method.

8. How to separate sound like: The Sound of the film is only on the television, while the other program's voice on the computer speaker

A: If you have only one sound card, then you play on the computer music or play the sound of the game will also be uploaded to the television, the solution is very simple, 30 yuan and then add a PCI sound card, and then the TV audio signal line to the sound card, the computer speaker plug to the motherboard from the board with the sound card. Use storm audio and video to play movies, view/option/output/directshow audio, select your PCI sound card to output, so that the sound of the movie will only be uploaded to the TV, and not to the computer speakers.

Then turn on the control Panel, sound and audio device properties/Click on the "Audio" tab/select the motherboard onboard sound card in the "sound playback" default device, which ensures that the computer speaker receives the signal normally. In this way, we can truly not interfere with each other, to achieve the perfect state.

9. What to do if the image shown on the TV is too bright or too dark?

A: You can set up the saturation, brightness and contrast of the image output to the TV set in the video card settings

10. What to do when the picture is shaking constantly?

A: The television screen is constantly flashing due to the refresh rate or the system mismatch. There are 3 ways to adjust:

(1). First reduce the video card refresh frequency to see if the problem is resolved.

(2). You can also change the TV format. In the video card, the TV format from the original "pal-d" to "ntsc-j".

(3). You can adjust the flashing filter in the video card settings.

11. Why my video card "View display Settings" Only the "single display" option, but not "copy"

A: Some older graphics cards do not support dual-screen output, so you can only select either a TV or a monitor. Only the video card has been replaced. Current display is supported with dual-screen output.

12. Why play some games, the picture on the TV will become a game screen sound TV play

A: At present when watching movies on TV, can be normal internet, office, or operate most of the window game, but for large full-screen games, many can not and see the film at the same time.