A tutorial on manually setting up fixed IP in a win10 computer

Method One, set the computer fixed IP address by the command way

1. First, we return to the traditional desktop location of the WIN10 computer, we also press the WIN10 computer keyboard on the Win+r shortcut keys to open the computer's running window, in the Open Run window, we enter CMD and click Enter, so that you can open the WIN10 System Command Prompt window.

2. In the Open Command Prompt window, we enter the command code interface to return, after which we enter our current IP in this command Prompt window, and then click Enter.

3. Wait for the computer to run, we enter set address "connection name" static new IP Address Subnet Mask Gateway 1, and then return to the.

Method Two, through the interface to the computer fixed an IP address

1. Login to Win10 system Desktop, right-click Start menu, click Open Control Panel (P) to proceed to next step. As shown in the following figure

2. In the Open Control Panel window, locate the network and Sharing Center and click Open to proceed to the next step. As shown in the following figure

3. In the Open Network and Sharing Center window, click on the Open "Ethernet" (that is, the computer's network connection) to the next step. As shown in the following figure

4. In the Ethernet window, click Open "Properties (R)" as shown in the following image

5. Here we need to drag the scroll bar, find Internet Protocol version 4 and click Open. As shown in the following figure

6. Manually enter fixed IP and DNS Click OK to complete the operation. As shown in the following figure