A780 plug-in card playback-set the A780telnet function in Linux

Play the A780 plug-in card-set the A780telnet function in Linux-Linux Enterprise Application-Linux server application information. For details, refer to the following. My A780 has been flushed to version 76. You can enable USBLAN in USB mode.

In linux, open the terminal window and run
Uname-r

Check whether your linux kernal version is 2.6 or later. If yes, continue to read this article. If not, install the latest linux version.

Run
Modprobe usbnet

This will load the USB net Module

Set A780 to USBLAN mode, connect the USB cable, and enter ifconfig in terminal.

Have you seen a USB 0 network port? Congratulations! It's successful.

Input
Ifconfig USB 0
Address 192.168.1.3
Netmask 255.255.255.0
Broadcast 192.168.1.255
Mtu 900

Set the IP address and subnet mask of USB 0. Note that mtu 900 is very important. It can prevent deadlocks on the mobile phone end.

Telnet 192.168.1.2

Then, the monta vista page of A780 is displayed.