About h3c Magic B1 wireless router settings

About h3c Magic B1 wireless router settings
I need this: 1, to use the existing wireless ID BELLE-WMS 2, do not change the network segment, 10.5.60.0/23 3, to be able to log on to the AP management interface, the purpose is to add monitoring related to nagios and so on. If you use relay, you cannot manage the interface to monitor the device. In addition, the speed of wireless relay is estimated to be slow, because it is bound to the existing wireless BELLE-WMS and then relay signal amplification, so consider again first, or use LAN port configuration IP and Advanced Configuration Under the route to solve it; in this case, you have to disable the lan dhcp service for the AP because dhcp-snooping is enabled to prevent the access switch from automatically dropping the port. For example: interface Ethernet1/0/41 loopback-detection enable dhcp-snooping server-guard method shutdown and vice versa undo dhcp ...... Statement is acceptable, but it is not recommended ...... Add the configuration map wKiom1YKRbfS0MnXAAHm2oJ5U1k662.jpg. Note: The default RESET of this vro is shown in the black hole next to the USB interface on the graph disk.
Default Login Address [same network segment 192.168.124.0] http://moshushi.cn