About HP ProLiant dl360e Gen8 installation sever2012 Unable to find the hard drive failure summary

In view of the installation of several twists and turns, the middle also carefully consider a lot of factors, so a simple summary of the emergence of the various problem-solving methods, the only drawback is that less personal in each process, no way, can only be restored by voice, stay for later use, if you can help meet the same problem colleague Best O (∩_∩) o haha ~

First of all, a brief description of the HP Server boot basic three keys, respectively, is f9/f10/f11, three keys corresponding to different operating functions,

• F9 in fact is similar to ordinary PC host Bois set the entrance;

• The F10 is an HP-led boot system with two functions, 1. Installation and update, as the name implies, is the system-installed boot disk integration, similar to Dell's system boot Disk 2. Operation and support, including many hardware configuration functions, RAID, IOL, etc.

• F11 is about the system boot selection;

Two methods were used in the installation process, and there were unforeseen problems ... Sad

USB Stick Installation

USB flash drive installation needs to be made into a CD-ROM image, and then the USB flash drive, but in the release of the installation encountered a problem, is the corresponding installation disk selected after the prompt format is not correct, "we couldnt create a new partition or 、、、" After seeing this error, I thought it was due to the incorrect format of the installation target disk, and then the format conversion, SHIFT+F10, command line execution, repartitioning, complete hard disk format conversion (no role, not to be repeat), a series of problems after the operation of the completion of the discovery or error,

The CD-ROM is installed to the same time when the target disk is installed, and the final problem arises because:::: Server does not need the new partition, only needs to format the target hard disk, that is, after formatting, directly click on the Next button to install , no doubt, The problem is solved, and I don't know why I don't need to re-new a partition. In short, tangled for a long time

CD Installation When there is a need to note that the CD is required to enter through the boot, the boot interface needs to choose manual installation, so that you can enter the image to install the specified version of the file, boot the system version of the scan has a problem!!!

About HP ProLiant dl360e Gen8 installation sever2012 Unable to find the hard drive failure summary