About Remote Desktop Connections under Windows

A few days ago the binding of their own computer (Lab) MAC address and the lab's intranet address, hope that the outside network can be free to access and remote control, but there is a problem, in this record, hope to encounter similar problems in the future to have a solution to the idea and direction, but also for people with the same problem to provide a reference:

Problem Description:

Windows8.1 System (Windows7 also similar) remote connection cannot be connected.

Before you start the connection, first open the remote connection for this computer:

and added the administrator account for this machine:

Then connect on the other machine:

But the connection is not successful, do not understand why.

The following procedures are resolved:

At first I thought it was some native service items (remote related) were turned off, so check the system's service items

However, the discovery of service item settings should be no problem, before the Rubik's Cube and according to its hints related to the optimization of the optimization, so some it is considered unsafe service items are closed, including remote connection what.

After this is excluded, the attempt is still not able to remotely connect to my computer from another machine, even the basic ping command cannot be completed.

I used the other system of this machine ubuntu14.04 tried, with Putty can connect to my host, because my machine has been bound to a fixed IP, so the machine itself and the reasons for the wrong IP bindings.

windows8.1 system is the reason, but the other students in the lab installed the system and I are the same and with my system can be remotely connected to other machines, so the reason for the elimination of the system, and finally determine some of the properties of my system to set the cause.

Because the basic ping command can not be completed, suspected firewall settings problems, so I shut down the firewall and then try again, this time to connect successfully!

So found the reason, it must be the firewall settings: Some of the settings of fire prevention Please do not allow remote connection! Later check the pre-fire settings, and finally found the firewall on the remote connection settings options, modified, open the firewall, success!

About Remote Desktop Connections under Windows