About mcp100 capacitor Charging Power Supply

Product Introduction

Mcp100It can provide up to 85% of the charging power, and output stable 27vdc/1.5a, 27vdc/3A two-way voltage current, the output voltage is in 24vdc ~ The 28vdc can be continuously adjustable to meet different charging voltage requirements. The ripple noise is basically stable below 100mV to ensure that the backend user system is not disturbed. It has good low temperature working characteristics, available at-40 ℃ ~ Working continuously at a temperature of 75 ℃.

Product Features

● Encapsulation: metal case modular, dustproof and shockproof;

● Operating temperature: Industrial-40 ℃ ~ 75 ℃;

● Isolated voltage: the input is highly isolated from the output by vac;

● Circuit protection: Short Circuit and overvoltage protection;

● The output voltage is continuously adjustable;

● Wiring installation;

● MTBF> 100,000 h;

 

In addition to the above common parameters, MCP also has the following features:

1. Start the main or auxiliary route with Time Sequence Control:

In the market, when the charging power supply products start, the main road and auxiliary road (Constant Current) are generally not sequential, resulting in the auxiliary road may first be faster than the main road, the auxiliary road output voltage cannot be limited, may cause damage to backend components. Jin shengyang used the ic vcc power supply control circuit to give priority to the main road and start after the auxiliary road, effectively preventing excessive damage to the backend components due to the high output voltage of the auxiliary road, fully protects power products.

 

2. Optimized Output short-circuit protection:

If there is a short circuit in the charging power product on the market, it will start its own short-circuit protection function. At this moment, both the main road and auxiliary road will enter the fight mode. It will also lead to high output voltage of auxiliary channels, resulting in damage to components. Jin shengyang mcp100 rechargeable power supply also has a short circuit function, but the difference is that after the product enters the short circuit protection function, the main road will enter the fight mode, the auxiliary road will stop working at this time, this avoids damage to components due to transient voltage burst of auxiliary channels. After the risk of short-circuit troubleshooting, the product's main and auxiliary routes will resume normal operation.

 

3. auxiliary road output provides self-powered functions:

In general, the auxiliary circuit IC is powered by the main road. If an exception occurs on the main road, the power supply of the auxiliary road IC will be abnormal, and the auxiliary road will also work abnormally. Jin shengyang mcp100 rechargeable power supply adopts auxiliary output self-power supply technology in the design. That is, the auxiliary circuit is designed to supply power to the IC. If an exception occurs on the main road, the secondary road work will not be affected.

 

This product is designed for metal casings and can be used outdoors. It is mainly used in power equipment such as permanent magnet switch controller and power grid cabinet, and can provide uninterrupted power supply for super capacitors.

Jin shengyang module power Expert www.mornsun.cn

About mcp100 capacitor Charging Power Supply