About one of the ways Dell clears the log step-by-steps (Idrac port clearance log)

Step 1: Configure the network port of the machine you use to be the same address as the Idrac port, i.e.:

Management port Default address is: 192.168.0.120 own use of the machine's IP as long as it is within the 192.168.0.0/24 network can;

Step two: Connect the Idrac port

The Dell management port can be connected to the first network port with a normal network cable, or it can be managed with a special cable connected to the port next to the left wrench.

Step Three: Open the Web page, enter the URL: http://192.168.0.120

Step four: Enter the user name and password in the webpage;

The default user name is: Root default password: Calvin

Step five: The display of the first page to the right of the Clear Log button, clear.