Acer 4250g TL 58 Vista OS XP installation strategy

Last year, I bought an Acer book and liked it. However, the system is based on Vista Basic. Although I like the interface, I cannot do a lot of work.

That's not the case. Because I did web development, I couldn't install IIS at the very least. So I decided to change the Vista system to Win 2003, but go to Official Website 1

Look, there is no driver in the above work, It is very uncomfortable, so I decided to install the XP system.

However, after the XP system disk of the tomato garden edition is put into the optical drive, the "Bad command" error will be reported as soon as it is run. My intuition tells me that the system disk has been put to bed after years of baptism.

So I asked my friend to borrow an XP system disk, but after I put it into the optical drive, the error "Bad command" was also reported during the operation. My intuition told me again, the first instinct was just a mistake.

Intuition, the problem lies in this machine.

So I went online and looked at everything. There was no formal solution. I was depressed.

Later, I took this document to the Company and asked our network administrator to complete it. As a result, I used a lot of methods to install the XP system, his approach: I will give a rough introduction to it.

First, I installed a lite version of the XP system with the ghost of "Old Mao Tao", and then made a complete backup of the XP system in this Lite version. As for how to implement this, I don't know much about it.

.

But the system didn't take a few days.

So I restored the ghost backup again, and the real problem came. When the system is restored, the XP system cannot be found, but the erecovery That Acer originally carried does not know

The file cannot be restored. It may be damaged when the XP system is installed.

I'm in a hurry. I don't have this book. How did I spend this week? I want to go and get the maintenance center at Xujiahui, saying that it would take 200 to install the XP system and 100 to install Vista in a few days.

Now, the little girl is good. She has two watery eyes and looks straight at me. I am sorry to see it ,................... sorry, the topic is far away.

If you don't talk nonsense, go to the topic.

Tool: 98 System disks and XP system Disks

Step 1: Press "F2" to enter coms during startup, change the mode to "ide" under the "Main" menu, and then change the mode to "boot from the optical drive"

Step 2: Enter the "98 System Disk" and restart. Under the boot of the 98 system disk, enter dos. Note that at this time, your c disk should be in FAT32 format; otherwise, DoS

The C drive may not be recognized.

Step 3: under the guidance of the 98 system disk, after entering the DOS, take out the 98 disk and put it into the XP system disk. Do not restart this process.

Step 4: Find the drive letter of the XP system under DOS, and use DOS to enter Windows/i386. after entering the directory, type: winnt

Step 5: After that, you can install the system.

This step is acceptable on my machine. You can try it!