Acer em250 Install Mac OS 10.6.3 and Xcode 4

The machine itself is installed Win7, in the logical partition of the hard disk finally 40g space, set the partition type AF,

Then use the installation disk to start, Cpus=1 into the installation interface, after installation, Win7 has EASYBCD,

Add multiple menus to boot the Apple system, reboot, check, show Chameleon interface, enter system,

Then install the driver, online Intel 945 graphics driver, Atheros ar8312 nic driver, sound card temporarily

Installed a universal drive, wireless with the Asus WL 167g, the driver was loaded, it took half a day.

In the afternoon to upgrade the software in the system to a new version, browser Safari,itunes,quicktime,flash plugin,

Install Firefox 4.0, then personalize the system. Since the screen of the netbook is 1024*600,

Display is not complete, had to add a monitor, home with a wireless keyboard and mouse, and then, after the netbook

Put aside, note that the boot on the monitor, such as entering the system, press the FN key can not switch the monitor.

Then prepare to install Xcode 4, download the installation package prompt requires that the system version is 10.6.6, to upgrade about download

1g Multi-update package, temporarily modify the system version, installed. Install Xcode and follow the wizard to create a simple

Programs that run simulations on the iphone and ipad environments, are interesting.

The idea of installing an Apple system on a PC these days is to first understand the hardware configuration of the machine you want to install,

Including the CPU type, is Intel or AMD, whether support SSE2, SSE3, graphics card, sound card, network card type,

Motherboard chip model, and how to set up AHCI in the BIOS. After doing these preparations, go to the appropriate installation disk,

In the beginning, it is not recommended to find the original CD unless your hardware is close to the Apple notebook hardware. On-line version

There are many, no absolute circumstances, the same disk, he is suitable, your machine may not fit.

And then familiar with the online tutorials, especially pcbeta in the novice installation, there are many instructions, see can be less

Take a lot of detours. Hardware configuration, Startup disk, startup parameters, if the installation appears to restart, it is likely that the AHCI is not opened or

The kernel file Mach_kernel in the installation disk is not suitable, or the Cpus=1 parameter is not used when starting the installation.

If you do not see the installation screen,-V can see the specific problem, there is stuck, or there is a reboot, if too fast

A flash past, there is a small trick, is to start, every other will press the pause key, then you can see the boot to There,

Then enter again, so that you can basically see where the last reboot is.

After installation, is the installation of the driver, if the installation of the driver is not suitable to start the system, in the Start screen

-S into single user mode, Mount UW/later, to the drive directory, add new and not start the drive deleted

Restart the system, because the driver is not easy to find, so if the driver is not met, is very normal, need to try more. And also

Patches such as ACPI are also important, affecting the startup of the installation.

Acer em250 Install Mac OS 10.6.3 and Xcode 4