Added a new hard disk, in the BIOS can be seen in the system's disk Manager does not see the new drive

A new hard drive was added today, and the newly added hard drive can be seen in the BIOS, but it is not visible in Disk Management and disk drives after entering the system. And in Device Manager other devices appear ATA Channel1, preceded by an exclamation point, as shown in:

And the computer becomes special card. Finally, with the help of a colleague, finally solved.

Here's how to fix it:

1. Right-click on the ATA channel1, click Update driver software = "Browse the computer for driver software =" Select c:\windows\winsxs= in the browse "next

2. You will then see the ATA channel1 in the IDE ATA/ATAPI controller, but the device with the exclamation point is visible on the other device, and the workaround is the same as the first step, which turns the device with the exclamation mark on the other device to the end of the update driver.

3. When you open Disk Management and its disk drive, you will be able to see your newly added hard drive.

Added a new hard disk, in the BIOS can be seen in the system's disk Manager does not see the new drive