[Administrator] [Netctl] Set IP to unplugged cable not up port

The following are provided using the NETCTL Configuration tool:

Demand:

Tstation Management mouth for daily use. There is no gigabit swap. So add a piece of gigabit card. This card is for the purpose of data transmission.

At present the main is weekly to T7 backup use. But because it is a direct connection. So each time it is each other up after setting the IP on each other. Today want to give tstation this mouth elan0 to do the configuration is not moving.

T7 also makes a profile so that you can directly back up each time you plug in the line.

Problem:

The configuration of the netctl is not effective until both ends are not up well. The error is as follows:

Interface ' Elan0 ' (timeout)

Workaround:

1. Man has netctl.profile. Find a parameter Skiponcarrier

2. Set it, similar to the following

Skiponcarrier=yes

3. Success.

[Administrator] [Netctl] Set IP to unplugged cable not up port