Adsl faq Software

Does the ADSL device need a dedicated driver?

A: Generally, you do not need to install any software that complies with the PPPoE Protocol. However, the NIC driver must be installed. Non-standard ADSL modem (for example, USB interface or built-in ADSL card.
Do ADSL and dial-up Internet have special requirements on existing application software?
A: basically no. For example, there is no difference between ICQ and IRC. It can be used directly after connection.
Does the existing operating systems support ADSL?
Answer: The key lies not in ADSL devices. If PPPoE software is available, you can use ADSL to access the Internet. Enternet currently supports Windows9x/me/NT/2000, MacOS, and Linux; winPoET supports Windows 9x/me/NT/2000 and MacOS. RASPPPoE supports Windows 9x/me/NT/2000. developers need to know about other operating systems such as UNIX.
Why is the startup speed slow after the PPPoE software of ADSL is installed?
A: This is a problem with your Nic settings. Because a valid IP address is required when the system starts, the DHCP server must be correctly set in the LAN, if it is used by a single machine, you can specify an IP address that cannot be routed to the NIC, for example: 192.168.xxx.xxx, subnet mask: 255.255.255.0

Why cannot I use Vicomsoft's Internet GateWay to complete virtual dialing?
A: Internet Gateway itself supports PPPoE, so you cannot install any Enternet300 or other PPPoE software.
How can I set up a proxy server to access the site when I want to access the Internet?
A: Because Enternet works independently, the proxy server must be set to use the LAN proxy service. WinPoET and RASPPPoE work with the dial-up network, so they are the same as general dialing settings, the proxy server needs to be set in the proxy server setting for the dial-up connection they have established.

Why is my PPPoE software not properly installed?
A: In general, check whether the NIC Driver is correctly installed and whether other PPPoE software is uninstalled before installation, whether other network software is installed in the system, such as shared Internet software. If it is better to uninstall the software, install PPPoE and install them again. For WinPoETRASPPPoE, check whether the dial-up network component of the operating system is correctly installed.
After the Windows2000 installation protocol is complete, no PPPoE related items are found in the network properties.
A: Go to computer properties, hardware, and digital signatures, and disable the "Disable Unsigned Driver file" project.
RASPPPOE. EXE running prompt NO Nic selected

A: ① RASPPPoE only supports standard Ethernet protocols, PPPoE protocols, and hardware devices. It does not support USB or built-in ADSL cards with built-in drivers; ② In Windows 9x, check whether the connection and network card protocol are correct. If the problem persists, reinstall the relevant hardware software. ③ in Windows 2000, check whether the "State" of the "local connection" object connected to ADSL is in the Disable state and Enable it; ④ in Windows 2000, check whether the PPPoE-related items of network properties are in the selected state.

RASPPPOE. EXE running prompt "RASPPPOE-No Service Offers already ed"
A: Check whether the hardware, cables, and connections are normal. If the ADSL device has a "synchronization indicator", check whether the related hardware is abnormal or disabled in normal ISP service device management, other device drivers, such as sound cards, may conflict with each other.
Error 797: The connection failed because the modem (or other connecting device) was not found.
A: in Windows 2000, check whether the "State" of the "local connection" object connected to ADSL is Disable and Enable it.

I have already entered the account and password. Why do I prompt that my password is incorrect?
A: When you enter a user name, you must specify the login and use service items because of the special nature of ADSL technology. Therefore, the user name format is generally in the following format: the User Account @ Service Project name Anxi ADSL is used as an example: 3226798 @ ADSL). Pay attention to the account letters in case.

How does ADSL set up Internet access in XP pro?

A: XP comes with the PPPOE dialup program. You just need to click Create a dial-up connection in the network, and then select whether to select XDSL for the dial-up type. You can establish an adsl pppoe dial-up connection.

In linux, how do I configure ADSL?
A: You can use the dedicated software RoaringPenguin, which is currently the most popular PPPOE driver in Linux.