Adsl Internet sharing

I am an ADSL Network and a cat is a USB network. How can I connect to another machine through a NIC to share the Internet?

========================================================== ============
The simplest way is to use a network cable. After a host performs dial-up login, find the adsl connection in Control Panel-network connection, right-click the connection, and set the connection to share, set the Host ip address to top-down:
192.168.0.1
255.255.255.0
Others are empty

The other one only needs to set the IP address:
192.168.0.2
255.255.255.0
192.168.0.1
192.168.0.1
My family is connected like this. All of the above are my online connections, and there have been many disconnections between them. However, they have all been fixed. If you have any questions, you can add: QQ: 199760630.
Hope to help you

========================================================== ============

You only need a vro.

========================================================== ============

Right-click the adsl dialing property and check it out.
He has a share. You checked it out !!!
This is what I use now,The downside is that both machines must be enabled.

========================================================== ============

After watching a video, you will know:

 

 

 Internet shared cracking _ Method for Internet shared access through ADSL Routers

Method 1:

I. Devices

1. ADSL cat is what Netcom delivers.
2. A router can be an ordinary one, which is cost-effective! (Only a few people can buy a few products for sharing)
3. network cable ~ Don't you need to say that? If it is enough, try to use a short one. If it is too long, it will affect the network speed! (The advantage of being short is that ~ Because we share a line with our neighbors next door, the laying of the line costs me a lot.

(But here we don't need a "vswitch" because the four ports of the "vro" are enough for the insertion and use of two computers)

2. Set vro

1. Choose [start]-[Control Panel]-[network connection]-Right-click [local connection]-select [properties]
2. In the displayed dialog box, select [Internet Protocol (TCP/IP)]-select [properties].
3. IP address 192.168.1.x (2 <x <256)
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1(Note that this gateway is the IP address of the router ,,,)
DNS service provided by network service providers
PS: if it is not set, set it to automatically get the IP address and automatically get the DNS server address!
4. Open the IE browser and enter 192.168.1.1. The default user name and password are admin and go to the vro settings page.
5. Run the setup wizard.
6. Set the Internet access mode to [ADSL virtual dialing (pppoe)]
7. Enter the [Internet account] and [Internet password], which are printed on the [customer acceptance confirmation ].

3. Complete the settings

After completing the settings, test the network connection. In the [running status]-Wan port status on the router management interface, if the WAN port has successfully obtained the corresponding IP address, DNS server, and other information, haha ~ Congratulations, you have successfully cracked the ADSL restrictions. You can share the Internet with multiple computers.

Method 2:

Click "advanced"-"Internet Connection Sharing" in the "properties" setting of a computer's broadband connection ", select "allow other network users to connect to the computer over the Internet ". Then, set the IP address of the NIC to 192.168.0.1, the IP address of the NIC of another computer to 192.168.0.2, The subnet mask to 255.255.0, the gateway to 192.168.0.1, And the DNS to 202.96.134.133, in IE's "Internet Options"-"connection" attribute, select "Never dial-up connections". Then, the computer can access the Internet without dialing. Note that the computer 192.168.0.1 must be turned on and connected to the Internet.

 

Appendix:What are the differences between HUB, switch, router, and MODEM ???