Adsl modem route settings: Huawei MT800A

Start of work:
After all the lines are connected, set IP Address: 192.168.1.XX = 2-8) and mask: 255.255.255.0 on the PC.

Gateway: After Entering 192.168.1.1, do not forget to click "add". Otherwise, no gateway is entered)
After confirming, the system prompts you to restart, enter the system again, open the browser, and enter in the address bar:
Http: // 192.168.1.1 and press ENTER
In this case, the SmartAX MT800A setting screen is displayed. Since it is not difficult to operate in the future, I will not bother.

Important:Configure PPPoE

Step 1 open the Web page "ATM Setting ";

Step 2 select the "PPPoE LLC" option from the drop-down list of the "Connection Type" field;

Step 3: Change the Operation Mode to enable.

Step 4: based on the information provided by the ISP or system supplier, fill in appropriate numeric values in the corresponding fields, such as "VPI", "VCI ", "PPPoE User Name" and security protocol, "PPPoE password" and other values, Default Router Default route) to enable;

Step 5 enter the correct value and click <"Submit>" below the field to Submit the setting to the input ADSL terminal;

Step 6 ensure that the NAT value is "Enable", which is Enable by default.

In step 7, the default value of DHCP is that "DHCP Server" is not enabled. You can decide whether to enable it as needed.

In step 8, click the "Save & Reboot" Directory on the Web page, select "Reboot" in the "Reboot Mode" dialog box, and click the button to complete the configuration of the ADSL terminal and Save it permanently ;.

Thank you, amen! After saving the file, go to the webpage and see ~~~~~

Related Articles]

• Routing configuration method of Huawei SmartAX MT800
  

• Simple configuration of Huawei Router
  

• A normal ADSL Configuration