Alpha router address loss

My friend lost his manual and forgot the initial value of the Alpha router address. I tried a lot of common Alpha router addresses, but they were useless. I finally solved the problem with the help of a netizen. I 'd like to share with you now.

Alpha router address of the "AFS1005" model

Knowledge focus: I have an alpha Broadband Router with the "AFS1005" model. This route needs to be set on the WEB interface with an IP address, because it is a friend of mine, so I have no instructions and I don't know what the IP address is. Which of the following friends is using or using this path.

I have an alpha Broadband Router named "AFS1005". This route needs to be set on the WEB interface with an IP address. Because it is from a friend, no instruction is provided, I don't know what the IP address is. Which of the following friends is also using or using this route? Please tell me the IP address set for entering the vro in the manual. Thank you!
◆ I have tried common IP addresses such as 192.168.0.1 \ 192.168.18.1 \ 192.168.1.1, and none of them are applicable.
◆ I have used Alpha "AFS1008", which is a word different from your 1005, but it is a switch with no routing function ~~~~
◆ I'm afraid you are also a vswitch ......
◆ I checked it. It is indeed a switch !~~~~
◆ 1008 has eight interfaces. You must have five interfaces.

Can someone tell Alpha the initial value of the router address?Ah Q & )?

I bought an Alpha v3 router, but there is no specification, with 192. 168. 1. 1. The setting page cannot be entered. Can anyone tell me? Thank you !!
◆ 192.168.18.1
◆ Connect the moned and network cable. Open IE and enter "192.168.18.1" in the Alpha router address"
◆ Account: admin
◆ Password: admin
◆ Enter and enter the quick installation setting window
◆ You do not need to set the first two items,
◆ Select virtual dial-up Internet access (PPPOE)
◆ Account: Your bandwidth account)
◆ Password: Your bandwidth password)
◆ Online for a long time
◆ Confirm again.
◆ Your computer's Alpha router address is set to automatically obtained ,,,
◆ No, the page cannot be displayed. Why? It's useless to press the reset key... Urgent !!! Khan !!!
◆ Alpha is generally 192.168.18.1
◆ But make sure that your computer's Nic is also the IP address segment
◆ Enable the NIC attribute and set the IP address to 192.168.18.2 to 192.168.18.255. Use the default subnet.
◆ In this case, I will try it first! Thank you!
◆ Select the option to automatically obtain the IP address, but the prerequisite is that the router and the computer restart, And the router must start first than the computer.
◆ Another point is to delete all connections and leave only one local connection.
◆ The setting page cannot be entered.
◆ By the way, why can't I set the interface when inserting the network cable into the WAN port but the LAN port ?) After you have set up a connection to the Internet, you cannot connect to the Internet.
◆ Why ?? What else do I need to set ??
◆ After the settings are complete, the computer does not need to dial any more. The router will automatically dial up. You only need to open your browser and enter a URL to access the Internet.
◆ Is this set for the Alpha router address or the cat? Let's take a look at the configuration of the router. Do you not need to set the cat?
◆ It seems that you can directly set the cat, so you do not need to set any vro! Can I use another vro for automatic dialing? Not clear
◆ After the settings are complete, the web page cannot be opened directly! Re-entering 192.168.18.1 is not supported. You can only turn off the vro and re-open it. Is there a problem with the vro? I don't understand!
◆ It is estimated that you have connected the wrong line, or your route is actually faulty.