"1" resolves the cisco switch password forgetting reset method:
1, power off + the front panel hold down the mode key, and then re-power, always press the switch front panel port 1 indicates from green to off does not light off, automatically into the switch mode;
2, input? See what configuration commands are (optional), enter "Flash-init" reset initialization, enter "Load-helper" to load the Help file, and see what "Dir flash" is in the Flash file. Find profile (Password in config file profile name for example: Config.text)
3, modify the original password to save the configuration file name rename Flash:config.text flash:config:text1;
4. "Boot" reboot system
5. CTRL + Z,end exit
6, restore the original password saved configuration file name rename Flash:config.text1 flash:config:text;
7, copy command to the flash inside the file configuration information copy to Runningconfig inside
Copy Flash:config.text Run
Show Running-config
8. Clear password under privileged mode
Config terminal
No Enable sec
Enable SEC Password Aa123
WR Preservation
This article from "7732617" blog, declined reprint!
Also large self-study 51cto--cisco Network device command