An error is reported when Wireshark is enabled when tcpdump is used to capture and store files.

Source: Internet
Author: User

Pcap: file has 186435570-byte packet, bigger than maximum of 65535


Solution: Set the transmission mode to binary.


When using TFTP for Transmission

TFTP> connect 192.168.1.1

TFTP>?
Commands may be abbreviated. commands are:

Connect connect to remote TFTP
Mode Set File Transfer Mode
Put Send File
Get receive file
Quit exit TFTP
Verbose toggle verbose mode
Trace toggle packet Tracing
Status show current status
Binary set mode to octet
ASCII set mode to netascii
Rexmt set per-packet Retransmission timeout
Timeout set total Retransmission timeout
? Print help information
TFTP> Binary

TFTP> put ddns. pcap

Sent 15460 bytes in 0.0 seconds


This article is from the "Linux basics" blog, please be sure to keep this source http://chaoyuezhangsan.blog.51cto.com/7176886/1774246

An error is reported when Wireshark is enabled when tcpdump is used to capture and store files.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.