An example of using UART and PC communication to realize ultrasonic ranging of msp430g2553 single chip microcomputer

Source: Internet
Author: User

This article mainly introduces the use of UART and PC communication to achieve msp430g2553 single chip ultrasonic Ranging example, need friends can refer to the next

It is suitable for msp430g2553 MCU to use the HC-SR04 ultrasonic ranging module and communicates with PC using UART.

The code is as follows:

#include

The last time a long current_time;//was measured

/*mypro*/

#define LED_1 BIT0

#define SW_2 BIT3

#define Ta1_1 BIT2//ta0.1 hc-sr04 Echo

#define TRIG BIT4//hc-sr04 TRIG

#define ACCU_GRD 7//accuracy Grade "xxx.x" + "

#define MIN_UNIT_TO1M 1000//1 m to 1 mm

/*timer0*/

#define SOUR_CLK 1045000

#define DIV_CLK_1 1

#define SYS_CLK_SIG_1 Sour_clk/div_clk_1

#define DISTANCE 45//DM

#define TIMER_RIG_MAX 0xFFFF

#define Max_time_1 distance*2/34*sys_clk_sig_1

#ifdef Max_time_1

#define SYS_CLK sys_clk_sig_1

#endif

#define UART_TXD BIT2

void Init_timer1 ()

{

P2sel |= ta1_1; TA1.1 cci1b be used

P2dir &= ~ta1_1;

Ta1ctl = Mc_0 + tassel_2; Timera_0 Stop Mode,clock=1mhz

TA1CCTL1 = CCIE + Scci + ccis_1 + SCS + CAP + cm_2; TA0CC1 capture mode + down edge

}

/*uart*/

void Init_uart ()//usci initialization function

{

UCA0CTL1 |= Ucswrst; Initializing serial port Registers

UCA0CTL1 |= ucssel_2; Select Subsystem Clock 1.045MHz

Uca0br0 = 0x6d; Baud rate is 9600

UCA0BR1 = 0x00;

P1sel |= Uart_txd;

P1sel2 |= Uart_txd;

P1dir |= Uart_txd; Set the P1.2 to the second function

UCA0CTL1 &= ~ucswrst; Initialization end

}

Long cal_distance ()//distance calculated by measured time

{

Return (long) ((340* (0.5000*CURRENT_TIME/SYS_CLK) *min_unit_to1m));

}

void delay ()//Rough Latency

{

unsigned char i,j;

for (i=124;i>0;i--)

for (j=8;j>0;j--);

}

Static char * Translater (long distance)//storing the measured distance as a string

{

static Char TRANS[ACCU_GRD];

int i;

Long F;

Trans[0]= ';

if (distance)

for (i=1,f=min_unit_to1m;i

{

if (i==4)

{

Trans[i] = '. ';

Continue

}

Trans[i] = ' 0 ' + distance/f;

Distance%= F;

F/= 10;

}

Trans[accu_grd-1] = ';

return trans;

}

void Once_pro ()//Send an ultrasound

{

if (TA1CCTL1 & COV)

TA1CCTL1 &= ~cov;

if (!) ( p1in & BIT3))

{

ta1r = 0;

P1out |= TRIG; Trig US High level

_eint ();

Ta1ctl |= mc_2; Continue mode

P1out &= ~trig;

P1out |= led_1;

while (TA1CCTL1 & CCIFG); Wait for capture interrupt to end

}

Else

{

P1out &= ~led_1;

_dint ();

}

}

void Uart_txstring (char *string)//UART_TX sends a string

{

int i=0;

while (string[i++])

{

switch (i)//filter invalid ' 0 '

{

Case 1:if (string[i]== ' 0 ') continue;

Case 2:if (string[i]== ' 0 ' &&string[i-1]== ' 0 ') continue;

}

Uca0txbuf = String[i];

Delay ();

}

}

/*uart_isr*/

#pragma vector = Usciab0tx_vector

__interrupt void Usci_txdistance ()//send measured distance to PC

{

Uart_txstring ("nr");

Uart_txstring ("current");

Uart_txstring ("Distance:");

Uart_txstring (Translater (Cal_distance ()));

Uart_txstring ("cm");

IE2 &= ~uca0txie;

}

/*timer0_int_isr*/

#pragma vector = Timer1_a1_vector

__interrupt void Capture ()

{

Current_time = TA1CCR1;

Ta1ctl &= ~mc_2;

TA1CCTL1 &= ~CCIFG; Clear CC1 interrupt Mark Bit

IE2 |= Uca0txie;

}

/*main*/

void Main ()

{

Wdtctl = Wdtpw + wdthold; Shut the dog.

Dcoctl = 0;

BCSCTL1 = Calbc1_1mhz;

Dcoctl = Caldco_1mhz;

p1out = 0;

p2out = 0;

P1ren |= sw_2;

P2ren |= ta1_1;

P1out |= sw_2;

P1dir &= ~sw_2;

P1dir = TRIG + led_1;

Init_timer1 ();

Init_uart ();

while (1)

{

int c = 8;

while (c--)

Delay ();

if (TA1CCTL1 & CCIFG)

TA1CCTL1 &= ~CCIFG;

Once_pro ();

}

}

Note : Please pay attention to the triple programming Tutorials section for more wonderful articles .

Related Article

E-Commerce Solutions

Leverage the same tools powering the Alibaba Ecosystem

Learn more >

11.11 Big Sale for Cloud

Get Unbeatable Offers with up to 90% Off,Oct.24-Nov.13 (UTC+8)

Get It Now >

Alibaba Cloud Free Trial

Learn and experience the power of Alibaba Cloud with a free trial worth $300-1200 USD

Learn more >

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.