Analysis notebook LCD screen maintenance and maintenance method summary

When using a computer, try not to eat anything.

When you are eating things will inevitably not splash, the results of a will be caused by the keyboard and other parts of the pollution, there is likely to splash on the LCD and leave some difficult to clean stains oh. So for the cleaning of the computer and your health, or after eating to play the computer, it is good for yourself and the computer.

Second, the use of time not too long and adjust the display brightness

LCD and CRT, its service life is much shorter, probably in two years or so will appear yellow phenomenon, when used over a period of time, the brightness of the backlight will gradually decline, which is to show the root cause of yellowing. In addition, the long time high load use will also make the liquid crystal particles aging failure and produce dead spots. Therefore, if used in the use of excessive, it will inevitably accelerate the emergence of these aging phenomenon.

It is well known that the LCD LCD screen used by laptops has many advantages, such as "low power, no radiation, no vertigo" compared to the CRT (cathode ray tube) Cathode ray tube display used by most desktops, and protects the user's eyesight to a great extent.

Therefore, in the daily use of the LCD as far as possible not to allow long time to work, and as much as possible to reduce its display brightness, when it is necessary to temporarily leave the computer when the best through the shortcut key to the LCD backlight temporarily closed.

Three, switch LCD on the lid to pay attention to several items

Now a lot of ultra-thin notebook in order to reduce the weight of the machine will be the LCD lid is very thin and soft, so this time the switch lid will be more attention.

The correct switch method can make the LCD and the fixed shaft from the uneven force caused by the damage, also can avoid because the long-term switch method should not be able to cover the side of the phenomenon, to light open and light operation.

Prohibit pressure, squeeze, touch, fall, smash, etc.

These three points of pressure, squeeze, touch is most users in peacetime use of the most easily overlooked, LCD is composed of multilayer reflector, filter plate and protective film combination, and these materials are very fragile and very easy to damage, so once the outside of the force on the LCD will cause the damage can not be repaired, such as display blurred, Water ripple and other phenomena, will affect the display output effect.

Warm tip: When you go out to your laptop with a thicker bag, placed in the process do not put heavy objects, moving the process as carefully as possible, to some extent to avoid the occurrence of the above situation.

So in the use of the process should pay attention to, if the use of improper, will greatly shorten its service life, now teach you how to maintain and maintain the notebook LCD screen bar.

First, soft cloth + clean water

If the LCD is often just a few dust, just need to use a wet soft cloth gently wipe the LCD surface dust on it, note that this piece of cloth should not be too rough, otherwise wipe after the screen will be scarred. In addition the soft cloth must wring dry, because the water is the natural enemy of the LCD. After cleaning, dry the wet trace.

Second, the use of special cleaning agent Notebook

When the LCD screen is full of finger prints and the oil spill when you eat, you need to use a number of special LCD screen cleaners, in the notebook store or some major cities in the electronic market can be bought,

Special cleaning agent Price is relatively high, and the capacity is relatively small, but for their own laptops do not care about this, protect the computer more important ah, rub the process always along a direction.