Analysis of vro1.1 configuration problems with 192.168.1.1

192.168.1.1 vro configuration problem explanation the concept of 192.168.1.1 vro configuration understanding www.2cto.com beginners will want to know exactly what they are when they see 192.168.1.1 or 192.168.0.1 ?, In this case, 192. 168. *. * is an intranet address. It is often used in internal LAN and is a reserved address of the Internet for internal private networks. The so-called Intranet address is the IP address used in the LAN. It is A non-standard internal address. 192.168.1.1 the definition of the gateway for vro1.1 setting 192.168.1.1 is the first stop where data goes beyond this segment. 192.168.1.1 or 192.168.0.1 is only an IP address of the LAN (internal address, the address retained in the network). There is a unique IP address for the Internet. very confusing. the following five types of IP addresses can be used in the LAN: 1.10.x.x.x.x 2.172.x.x.x 3.192.x.x.x 4.224.x.x.x 5.240.x.x.x. The 5 types of IP addresses are reserved for LAN, it cannot appear on the Internet. here we should have a preliminary understanding. This is generally the web management website of the router. The account and password vary depending on the vro brand. There are adminadmin, admin (null, root123456, etc! Www.2cto.com 192.168.1.1 router configuration problem Summary 1. all ADSL users should promptly modify the default password after obtaining the ADSL modem, so that they do not need to debug these settings if they are using the initial ADSLMODEM address and username and password, you must first set the IP address of the network card to the same network segment as those of ADSL. 2. The default initial IP address, user name, and password of the factory deployed in ADSL must be known for debugging. There are three methods to debug these settings: www.2cto.com, which is the most common WEB method, is to fill in the IP address set up in the browser, such as QX1680, that is, enter 10.0.0.2 in the browser address bar, after the prompt box appears, enter the User Name admin and password qxcommsupport to set the administrator interface. This method is the most common and simple one. The second method is to use TELNET, telnetIP, such as early co-Qin 642, telnet192.168.1.1, and then enter the password 1234 to enter the English character interface. The third method is to use the vendor's own configuration program to enter the configuration interface, such as CyberLink6307/6309KG. It uses dslcom.exe in the optical disk with Cybrlink6307/6309kg. the default value is: Route IP Address: 192.168.1.1 password: stm, because this method is not as convenient as the first two methods, low-end products are rarely used. 3. debugging of most products requires that the dual-stranded wires of the product be connected first, and then the IP address of the NIC of the local machine be set to the same network segment as that of the dual-stranded wires, if the default IP address or password is changed, most of them can be reset to restore the default value. The most common and useful method is to keep holding down the reset key and powering on after power-off. After a short period of time, the default factory value can be restored. The summary of the vro1.1 setting method of 192.168.1.1 is introduced here. I don't know if there are any suitable methods for you. I hope you can help a lot of netizens.