Analysis on the wifi driver of atheros

Source: Internet
Author: User

Analysis on the wifi driver of atheros

Ar6003 driver document summary <喎?http: www.bkjia.com kf ware vc " target="_blank" class="keylink"> VcD4KPHA + IDxpbWcgc3JjPQ = "http://www.2cto.com/uploadfile/Collfiles/20140831/2014083109355817.png" alt = "\">

1. wmi: wireless module interface // wireless module structure

2. bmi: bootloader message interface

3. htc: host target communications

4. wps: wifi protected setup

5. CS: connection services module

6. STA: station

7. AP: access point

Wireless application: production data and consumption data

Wireless module interface (WMI): communication protocol between host and target

Host/target communications (HTC): send and receive data

Hardware interface (ICF): Call the Hardware interface to send and receive data (sdio interface is used here)

Bootloader message interface (BMI): communication protocol when the wifi Chip starts. You can download the binfile to the wifi chip.

Ar6000 wifi driver analysis (AP Mode Analysis)

Main process of Code Execution

// Mount the sdio driver to the kernel and register the network device

Module_init (_ ar6000_init_module );

À _ ar6000_init_module

À status = ar6000_init_module ();

À status = HIFInit (& osdrvCallbacks );

À status = sdio_register_driver (& ar6k_driver); register the sdio Driver (the kernel sdio protocol stack called directly here)

À. probe = hifDeviceInserted, // execute the driver's probe function

À ret = hifEnableFunc (device, func );

À kthread_create (async_task, // A sdio asynchronous data sending process is enabled in the kernel

À taskFunc = startup_task; // start a kernel process and execute the startup_task process.

À if (osdrvCallbacks. deviceInsertedHandler (osdrvCallbacks. context, device ))! = A_ OK) // call the function pointer ar6000_android_avail_ev for wifi device installation. This function is registered in android_module_init.

À ar6000 _ android_avail_ev

À ret = ar6000_avail_ev_p (context, hif_handle );

À ar6000 _ avail_ev // This function pointer assignment is very tortuous. First, it is assigned to osdrvCallbacks in the ar6000_init_module (void) function. deviceInsertedHandler = ar6000_avail_ev; then, in android_module_init (& osdrvCallbacks); ar6000_avail_ev_p = osdrvCallbacks-> deviceinsertetedhandler;

À BMIInit (); // start the wifi Module

À ar-> arHtcTarget = HTCCreate (ar-> arHifDevice, & htcInfo); // create htc and disable interruption

À status = (ar6000_init (dev) = 0 )? A_ OK: A_ERROR; // initialize a network device

À (BMIDone (ar-> arHifDevice )! = A_ OK) // The bmi starts successfully.

À status = HTCStart (ar-> arHtcTarget); // start htc and enable interruption

À status = DevUnmaskInterrupts (& target-> Device); // enable interrupt and register the interrupt handler

À HIFUnMaskInterrupt (pDev-> HIFDevice); // registers the interrupt handler.

À ret = sdio_claim_irq (device-> func, hifIRQHandler); // register the interrupt handler. After the interrupt, The hifIRQHandler handler is called.

À if (register_netdev (dev) // register a network device with the kernel. The Initialization is complete.

// Code process after interruption

À hifIRQHandler (struct sdio_func * func) // interrupt processing function (guid. c)

À status = device-> htcCallbacks. dsrHandler (device-> htcCallbacks. context); // function pointer of the device processing function

À A _ STATUS DevDsrHandler (void * context); this function is filled in the HTCCreate function after htc is created: HTCCreate-> DevSetup à htcCallbacks. dsrHandler = DevDsrHandler; (ar6k_events.c)

À status = ProcessPendingIRQs (pDev, & done, & asyncProc); // The function for processing pending events, which will be processed cyclically here (ar6k_events.c)

À status = pDev-> MessagePendingCallback (); this function pointer is also the target-> Device. MessagePendingCallback = HTCRecvMessagePendingHandler filled in HTCCreate; (htc_recv.c)

À HTCRecvMessagePendingHandler ();

À DO_RCV_COMPLETION (pEndpoint, & container );

À DoRecvCompletion ();

À pEndpoint-> EpCallBacks. epRecv (pEndpoint-> EpCallBacks. pContext, pPacket); // This function pointer is the connect. epCallbacks. epRecv = ar6000_rx; ar6000_rx is a very important function.

À ar6000_rx (void * Context, HTC_PACKET * pPacket)

// Data sending Process

À ar6000_data_tx (struct sk_buff * skb, struct net_device * dev)

À HTCSendPkt (ar-> arHtcTarget, & cookie-> HtcPkt );

À return HTCSendPktsMultiple (HTCHandle, & queue );

À HTCTrySend (target, pEndpoint, pPktQueue );

À HTCIssueSend (target, pPacket );

À status = DevSendPacket (& target-> Device,

À status = HIFReadWrite (pDev-> HIFDevice, // passed to the sido Bus

À AddToAsyncList (device, busrequest); // Add the data packet to be sent to the asynchronous sending queue

À up (& device-> sem_async); // gets the semaphore and sends data using the kernel process.

À static int async_task (void * param) // send data

À _ HIFReadWrite (); // send data

À sdio_writesb (); sdio_memcpy_toio (); sdio_readsb (); sdio_memcpy_fromio ();

À down_interruptible (& busrequest-> sem_req )! = 0 // release the semaphore

// Interrupt sending or receiving process

À HTCRecvMessagePendingHandler

À status = HTCIssueRecv (target, pPacket); // receives data packets asynchronously.

À status = HIFReadWrite (pDev-> HIFDevice, // The command is sent to the sdio bus.

À is the same as the sending Process

// Sta connection process

À ar6000_rx (); when the connection command is received, ar-> arControlEp = ept = 1

À wmi_control_rx (arPriv-> arWmi, skb); // resolution command

À case (WMI_CONNECT_EVENTID): // connection command

À status = wmi_connect_event_rx (wmip, datap, len );

À A_WMI_CONNECT_EVENT (wmip-> wmi_devt, ev );

À ar6000_connect_event (devt), (pEvt ));

À wireless_send_event (arPriv-> arNetDev, IWEVREGISTERED, & wrqu, NULL); // send event wext-core.c to the network layer

À skb _ queue_tail (& dev_net (dev)-> wext_nlevents, skb); // wext-core.c

-------------------------------- Processed by the network layer --------------------------------------------------------------------

À sock _ ioctl (struct file * file, unsigned cmd, unsigned long arg) // net/socket. c

À err = dev_ioctl (net, cmd, argp); // net/core/dev. c

À return wext_handle_ioctl (net, & ifr, cmd, arg); // net/wireless/wext-core.c

À ret = wext_ioctl_dispatch (net, ifr, cmd, & info,

Ioctl_standard_call,

Ioctl_private_call); // net/wireless/wext-core.c

À ret = wireless_process_ioctl (net, ifr, cmd, info, standard, private); // net/wireless/wext-core.c

À return dev-> netdev_ops-> ndo_do_ioctl (dev, ifr, cmd); // This is the function registered with the registered network device. ndo_do_ioctl = ar6000_ioctl,

--------------------------- The function of the driver layer called at the network layer ----------------------------------------

À int ar6000_ioctl (); // ioctl. c

À case IEEE80211_IOCTL_SETKEY: // ioctl. c

À ar6000_ioctl_setkey (arPriv, & keydata); // ioctl. c

À status = ar6000_sendkey (arPriv, ik, keyUsage); // ioctl. c

À status = wmi_addKey_cmd ()

À status = wmi_cmd_send (wmip, osbuf, WMI_ADD_CIPHER_KEY_CMDID, sync_flag );

// Data transmission process

À ar6000_rx (); when the connection data is received, ept = 2

À ar6000_deliver_frames_to_nw_stack (void *) arPriv-> arNetDev, (void *) skb );

À A_NETIF_RX_NI (skb );

À netif _ rx_ni (skb) // transmits data to the ip layer

Hostapd: Set the ssid

À int main (int argc, char * argv []); // main. c

À interfaces. iface [I] = hostapd_interface_init (& interfaces, // main. c

À hostapd _ setup_interface (iface) {// main. c

À ret = setup_interface (iface); // hostapd. c

À return hostapd_setup_interface_complete (iface, 0); // hostapd. c

À if (hostapd_driver_commit (hapd) <0) {// ap_drv_ops.c

À return hapd-> driver-> commit (hapd-> drv_priv); //. commit = ar6000_commit assigned in driver_ar6000.c

À ar6000 _ commit (void * priv) // driver_ar6000.c

-------------------- Enter the driver layer through ioctl at the application layer ---------------------------------------------------------------

À if (ioctl (drv-> ioctl_sock, SIOCSIWCOMMIT, & iwr) <0) {// (iw_handler) ar6000_ioctl_siwcommit assigned in wireless_ext.c,

À ar6000 _ ioctl_siwcommit (struct net_device * dev, // wireless_ext.c

À ar6000 _ ap_mode_profile_commit (arPriv); // ar6000_dr.c

À wmi _ ap_profile_commit (arPriv-> arWmi, & p); // wmi. c

À status = wmi_pai_send (wmip, osbuf, WMI_AP_CONFIG_COMMIT_CMDID, NO_SYNC_WMIFLAG); // wmi. c

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.