Android 1.6 is successfully installed on the first-generation iPhone)

From: http://bbs.weiphone.com/read-htm-tid-755129.html

 

[Updated in 4.24]
If you are a friend of the black screen after installation, use the new openiboot file to replace the old one:
Http://u.115.com/file/f68c02d01e

Look at the picture without talking nonsense

Below are some tutorials to share with you.

Preparations:
Windows and Ubuntu are installed. I am Windows 7 and Ubuntu 10.04;
Make sure that you are a generation iPhone and have escaped from jail;
I am not responsible for answering questions about Linux commands. Sorry.
Download the package again:
Http://www.rayfile.com/files/ede2a007-4e2a-11df-a065-0015c55db73d/

Installation steps:
(1)winrardecompress the android_by_tyllrxs.tar.bz2 file (WinRAR 3.91 cannot be decompressed)

(2)use the winscp000091helper class to put six android.img.gz, cache. IMG, ramdisk. IMG, system. IMG, userdata. IMG, and zimage files in the/private/var/directory of the iPhone.

(3) restart your computer, disconnect the data cable, and turn off the iPhone

(4) Go to the Ubuntu system, press and hold the Home Key of the iPhone, plug in the data cable, and wait until the iPhone displays the iTunes and USB icons and release the Home key;

(5) Open the application in UbuntuProgram=> Attachment => terminal, enter the following command: (assume that you extract the android_by_tyllrxs.tar.bz2 file to the tttttttt directory in the main folder)

Copy Code

1. Switch to the working directory
2. CD tttttt
3. Install the required library files
4. Sudo apt-Get install libu_s_b-1.0-* libreadline5 (for Forum reasons, remove the underline in the middle of u_s_ B)
5. Enter the root user password and wait until the installation is complete.
6. Sudo./loadibec openiboot. img3
7. The iPhone displays the dual-system interface.
8. Press the power key, move the cursor to the openiboot icon below, and press the Home key. A bunch of command lines are displayed.
9. Enter sudo./oibc
10. Enter install. Wait a moment... [S: 5]
11. When "done with installation" appears, it indicates that the installation is successful (you must wait until this occurs !)
12. Enter reboot and wait for restart...

Success !!!

Start:

On the boot page, press the power key to select the system to start and press the Home Key for more than 2 seconds (more than 2 seconds required! Haha ~) To start the system you selected.