Apple Mac PC remove OS X system only install win7 single system tutorial

Although we all know the OS X system as a native-band system for Apple Mac computers, has a very good user experience, is the Mac product itself is a big bright spot, but small series also often see in the major forums many netizens want to be able to unload the OS X system only installed Win7, this will whether sensible opinions, But there is no real tutorial on the Internet to give you help, so today PC6 small compilation for this tutorial, hope to help everyone.

The first is preparation work:

1.WINDOWS image file (xp,win7, Win8, depending on individual needs)

2.U disk (8GB u disk is recommended, so that you can easily wait a moment directly to the Windows mirror directly inside)

3. An available PC (for making U disk boot)

4.BOOT CAMP for Windows;

Other preparation tools for Windows systems are downloaded on their own request, such as Windows activation software.

　Here are the detailed steps:

The 1th step is to uninstall the Mac system.

When the Power-on option key, enter the mode selection menu, choose to repair Mac 10.X, then select the "Disk Utility" option, enter the left side of your hard drive Macintosh, click the "Erase", wipe off the time note, the hard drive format must be changed to "MS-DOS (FAT)" Format, because the Apple's hard disk format defaults to the hfs+ format, this format PE is no way to identify, so be sure to change to fat format. If your Mac already has several partitions, then erase each partition by one by one, and change to "MS-DOS (FAT)" format. Many friends are actually troubled here, so changing the format is critical.

2nd step, make WinPE u disk startup tool

Recommended to use the old Peaches U disk boot.

Follow the tutorials inside to download and make your WinPE u disk boot device. After doing well, put the Windows Gho file you prepared before or the iOS file into the "Gho folder" inside the U disk.

Step 3rd, install Windows

The production of a U disk inserted into the computer, the same, the power-on installation option key, out of options, select Windows Options, the computer will enter the WinPE system to read the U disk inside, the following figure:

PS: Because my computer system is already windows, so the left side of the disk is also windows, this does not matter, anyway, choose the picture in the red box inside the windows can be.

Next you will go to menu options, as shown below, select 2nd, "Run old Peaches Win8pe x 86 lite".

PS: Here, please do not follow the old Peaches website before the selection of "4" and "1", "not into the PE installation GHO to the hard disk first Partition", because we have to partition and format the hard disk again, so we need one more step. )

Then start loading, as shown below, waiting.

After entering the PE, the first cancellation can only be quickly installed, also need to partition, point "Cancel".

Open the "Diskgenius partitioning tool" built into PE, as shown below:

After entering the partition tool, the following figure, the red box is your current hard disk partition status, respectively, right click on them, delete the current partition, regardless of what pops up, point "yes".

After the deletion, the sections in the Red box will be merged into a gray bar (as if it were gray), which is an unpartitioned state.

Then the quick partition above the dot, as shown in the following figure red Box:

According to your own needs to partition the hard disk, format recommended or choose the NTFS format, will save a lot of trouble later! Since I am 120 air, I just split two areas, a 33, a 80, if you are 500 of the MacBook PRO, you can divide more than two areas.

After the division, make sure, wait for him to run, after running off the partition tool will be OK.

Then you now open "My Computer" to see if it is according to your choice, has been partitioned successfully, if not, repeat the above action, it must be where the wrong, no matter what he prompts you, choose "Yes" on the right.

Now you come again. "Open old Peaches PE one-button installed", the following figure:

Select the system disk you divided into C disk, OK, and then start running again.

At this point, the next wait for it, loading good image after the computer will automatically restart, restart the time will stop in the white screen about half a minute, do not be flustered, normal phenomenon, quietly waiting, and then Windows began to install, and then OK.

4th step, install the driver

Because today's windows mirrors are basically built to drive the installer, so when you install Windows graphics card Ah, sound card ah, and so on these drivers are generally installed together, but installed Windows, you will find that your keyboard lights are not lit, double finger touch of the right key function is gone, Then open the front-ready boot CAMP, once again with the download, extract, get the following file, the following figure:

Open the Bootcamp folder and click Setup, as shown below:

Then wait for him to take it slow, about 5-8 minutes.

Once installed, your right lower corner Mac system is familiar with boot CAMP, appears. The following figure:

Then you follow your custom to set it, keyboard lights are also lit, the keyboard has a subsidiary function, and then go to enjoy windows!