iOS Terminal connection Wireless network setup steps
The detailed setup steps for the
iOS terminal connection to the wireless network are as follows:
First step: Open the iOS terminal main interface, select and click the
Settings menu, as shown in the following image:
The second step: in the
settings of the main interface, to find a
wireless LAN . As shown in the following illustration:
Step Three: go to the Wireless LAN main menu, turn on the
wireless switch , and search for and click on the wireless signal you want to connect. As shown in the following illustration:
Note: The signal name is set SSID, if you do not confirm the signal name, you need to connect to the router through the wired computer, through the browser into the management interface, click
Wireless Settings
>>
Basic Settings View The SSID, click Wireless
settings
>>
Wireless security Settings to view the wireless password.
If you cannot find the wireless signal, please click on the reference:
Fourth Step: Enter the wireless password. Click
Join . As shown in the following illustration:
When "
√" appears in front of the appropriate SSID, the wireless connection is successful. As shown in the following illustration:
Try to surf the Internet at this time.
Search to wireless signal can't even, how to do?
When using a wireless terminal on the
IOS system to connect to a wireless network, if a search signal is present and the connection is unsuccessful, the following methods can be used:
If the wireless device always shows that you are joining or cannot join the network, try deleting the saved profile on the wireless client while ensuring that the router's DHCP feature is turned on.
Action method: in the
Wireless LAN , click on the corresponding wireless signal display after the
blue exclamation point icon, the Signal display box, click to
ignore this network , as shown in the following image:
At this point, tap and connect the signal, enter the wireless password test can connect successfully.
The connection error signal will cause the connection to be unsuccessful, please confirm the wireless signal name (SSID number).
Confirmation Method: Connect to the router management interface via a wired computer and click on the
wireless settings
>> View the
SSIDin the
basic settings . As shown in the following illustration:
After confirming the signal name, re-search the wireless signal, confirm the search to the signal of the wireless signal's own router, try to connect again.
Entering the wrong wireless password will also cause the connection to be unsuccessful, please confirm the wireless password.
Confirmation Method: Connect to the router management interface via a wired computer and click on the
wireless settings
>>
Wireless security Settings confirm the
wireless password in the. As shown in the following illustration:
Wireless MAC address filtering on the router, the improper setting of the rules will cause the wireless connection to be unsuccessful, and it is recommended that the feature be temporarily disabled.
To
set the method: Connect and log on to the router management side via a wired computer and click
Wireless Settings
>>
Wireless
MAC
address filtering turns off wireless MAC address filtering. As shown in the following illustration:
If the password is entered correctly but cannot be connected, it is recommended that you remove the encryption and test whether the connection is successful without encryption.
To
set the method: Connect and log on to the router management side via a wired computer and click
Wireless Settings
>>
Wireless security Settings , choose
not to turn on wireless security , and then
save
>>
reboot . As shown in the following illustration:
When the reboot is complete, the wireless terminal attempts to connect to the signal.
Use a different wireless terminal to connect to the router to confirm that you can access the Internet properly. You can also use this wireless terminal to connect to other normal wireless network comparison tests
