The ipad and iphone have a consistent approach to configuring IP addresses, and this article only takes the ipad as an example.
STEP1 : Open IPAD main interface, select " Set up " menu, select the Wi-Fi ", enter Wi-Fi set the page as shown in the following illustration.
STEP2 : Open the wireless switch, search the wireless signal, as shown in the following figure.
STEP3 : Select any one of the wireless networks on the right. ">" button (in this case, the tp-link_pocketap_419f2e as an example) , the wireless network connection parameter Settings page pops up, as shown in the following figure.
STEP4 : You can choose a static based on your actual network situation IP or DHCP , and set the relevant parameters.
The above illustration shows the configuration static IP addresses, specifying manually for wireless network connections IP address and other parameters. For example:
IP Address :192.168.1.10
Subnet Mask: 255.255.255.0
Router: 192.168.1.253
DNS : 192.168.1.253
The following figure shows the configuration DHCP , IPAD automatic access to wireless network connections IP address.
as shown in the figure above IPAD Automatic acquisition of IP address and other parameters.
IP Address :192.168.1.101
Subnet Mask: 255.255.255.0
Router: 192.168.1.253
DNS : 192.168.1.253
Small hint, above is to Tplink router as an example, if it is other routers may 192.168.1.101 will be 192.168.0.101 Oh, this can be based on your router gateway settings you can enter the router to view.