Apple notebook, all-in-one installation dual system (MAC OS + Windows 7) tutorial

1. Win7 Pure version of the installation CD-ROM (64-bit best, because the new or all-in-one Mac system Bootcamp tool is the latest version 5.0, can only install 64-bit Windows system. Activation of the Win7 Activation tool is available after installation is complete.
2. External optical drive One (machine with CD-ROM not used)

3.2g above the U-disk one, used to download Windows under the Mac OS required drivers.

Step One,
Find the Bootcamp program under Mac System, go to-utility-bootcamp


Open Bootcamp, go straight ahead, show up.

Select the second item, which means to download the drivers that are required to be installed by this computer under Windows. Point continues, appears


At this point you plug in the U disk, to be recognized, choose to store the copy to an external drive, point continues.


Location Select your U-disk, U-disk call What name is what name, my U-disk No name is called "No Name", Windowssupport is the folder name that stores the driver, you can change, also do not change. Then point storage, start to download the driver, the whole process according to the speed, the fastest also 10 minutes or so. After downloading, back to the original interface, as follows


Now start installing Win7, connect the optical drive first, then put the Win7 installation CD into the CD-ROM, then select the third item, and click Continue







The above step is a partition, drag the middle of the point around the move, generally do not use the Mac OS System, direct point to the far left. Then click Install, start the partition automatically, and then restart automatically to start loading the Win7.


Installation Win7 process is not said, with the ordinary computer installed version of Win7, the only thing in the middle of the above is the above step, be sure to choose to install in the Bootcamp this partition, and before installation, the partition should be formatted. About 20 minutes, Win7 installed, this time the network card, sound card, graphics card What the driver has not, began to install the driver, the front download drive U disk plug on the computer, find the Windowssupport folder, the interface is as follows


Double-click Setup, start the installation, the middle no tube, about 10 minutes less, installed, prompt restart effective, restart.


Reboot, the driver is normal, the lower right corner of a bootcamp program, right-click Open Camp Control Panel, you can set the boot into which system, as well as the operation of the touchpad. This is basically good, because the installation version of the Win7 will not be automatically activated, so now you have to activate the tool, or one months should be prompted to pirate. I use the activation tool called Win7 Activation. Not bad. Such as


The restart is OK after activation.

Apple notebook, all-in-one installation dual system (MAC OS + Windows 7) tutorial