Application (ACL) of the access control list of cisco router Integrated Experiment II)

Application (ACL) of the access control list of cisco router Integrated Experiment ii ip Address Configuration on each device, steps ======================================================== ========================================================== ======================================= Configure route R1: (config) # ip route 0.0.0.0 0.0.0.0 192.168.1.254 route www.2cto.com R2: (config) # ip route 0.0.0.0 0.0.0.0 192.168.255.254 ================================ ========================================================== ============================ configure ACLSW1: create vlan 10 and vlan 20 Add interface f0/10 to vlan 10 interface f0/15 Add vlan 20 Step 1 (config) # time-range worktime (config-time-range) # periodic weekdays to (config-time-range) # exit (config) # access-list 100 permit tcp host 192.168.10.1 host 192.168.20.1 eq 80 time-range
Worktime (config) # access-list 1 permit host 192.168.1.1 (config) # int vlan 10 (-vlan) # ip access-group 100 in (config) # line vty 0 4 (config-line) # password test (config-line) # login (config-line) # access-class 1 using www.2cto.com R2: (config) # access-list 100 permit tcp host 192.168.10.1 host 192.168.20.1 eq 80 (config) # access-list 100 permit icmp host 192.168.1.1 host 192.168.20.1 echo (config) # int f0/0 (config-if) # ip access-group 100 in ==================================== ========================================================== ====================================
Set the time on the layer-3 Switch to verify the effect of the time ACL SW1: # clock set 9:00:00 1 may 2011 set the time to author Xun ruyu