Application of Plastic Optical Fiber System in LAN

The cabling system is widely used in multi-mode Z optical fiber due to a small number of trunk lines connected to the floor. in the horizontal direction, there is no suitable medium that can provide sufficient bandwidth, it also has the advantages of easy installation, low cost, and strong anti-interference ability. The new plastic optical fiber (POF) as the transmission media of the all optical fiber network has all the advantages above. The diameter of plastic optical fiber is generally 0.3 ~ 3mm, the large diameter is suitable for connection, and the optical coupling efficiency is also high. It also has the advantages of softness, bending resistance, vibration resistance, anti-radiation, low price, and convenient construction, it can replace traditional Z optical fiber and copper cables and is very suitable for local networks with many connection points.

Using Plastic Optical Fiber to construct a large-scale local area network requires two products: passive cabling and active plastic optical fiber network devices.

The plastic optical fiber cabling product consists of the following parts. POF horizontal optical fiber cables are used for horizontal subsystems of Integrated cabling to connect devices between terminals and floors in various work areas. Plastic Optical Fiber plug-ins are connectors for connecting plastic optical fiber cables and devices; the plastic optical fiber jumper is a cross connection between the optical fiber distribution frame and equipment, or a connection line between the optical fiber socket and equipment in the work area; the plastic optical fiber mark Jumper can easily find end-to-end connections of each patch cord in a large number of patch cords on the distribution frame to reduce maintenance work. The plastic optical fiber socket is the work zone information outlet of the plastic optical fiber cabling system; the plastic optical fiber coupler is a connector used to connect two optical fiber cables. The plastic optical fiber distribution frame is an optical fiber end-to-end device for cross-connection management between optical fiber and optical fiber, and between optical fiber and equipment.

Plastic Optical fiber LAN

Plastic optical fiber network products are mainly used to achieve high-speed network connection between working group switches and computer equipment in the LAN. The main plastic optical fiber network equipment is as follows.

A Plastic Optical Fiber Department switch can provide multiple Ethernet Optical Fiber ports to provide high-bandwidth and high-performance Optical Fiber connections between Working Groups or working groups.

The plastic optical fiber Nic has a computer pci nic with an Ethernet Plastic Optical Fiber Interface. It complies with the IEEE standard and is out-of-the-box and supports full duplex mode.

POF-RJ45 optical transceiver is an Ethernet Optical Fiber Interface to RJ45 converter that converts Ethernet electrical signals into optical signals that can be transmitted on plastic optical fibers, and vice versa.

1. Application of POF optical fiber cabling system in LAN
2. Application of Plastic Optical Fiber in short distance communication