Application point of view: comprehensive explanation of mercury wireless router settings

The knowledge about wireless route settings is still very rapid. Here we mainly explain the specific methods and steps for setting the mercury wireless router. Use the notebook as the host and other laptop) as the shared Internet access from the slave machine. The setting of the host's Mercury wireless router is as follows:

Step 1: Install the corresponding MODEM, ISDN, And ADSL drivers and nic drivers, and ensure that the MODEM and Internet connections are normal.

Step 2: Right-click "Network neighbors" and select "properties". In the "network" dialog box that appears, find the network interface card of the local TCP/IP protocol) for example, "TCP/IP> Intel21143based10/100 mbps ......", Double-click its "attribute ". Select the "DNS configuration" item, tick it before "Enable DNS", and select a name from the host item, in the "DNS server search order" column, set its mercury wireless router to the IP address of the ISP Server that provides Internet services for you, for example, "61.139.2.69" Sichuan Telecom ISP ), "Add" and then "OK. Select "specify IP Address" in "ip address", set the local IP address to 192.168.0.1, And the subnet mask to 255.255.255.0. "OK", restart your computer.

Step 3: Next, If you want other computers to share the Internet with you, you need to install a shared Internet software. Generally, we recommend that you use the "Internet Connection Sharing" built in the operating system after PWIN98 of Microsoft to achieve Internet sharing. It supports MODEM, ISDN, ADSL, and other Internet access methods ). Choose "Control Panel"> "Add/delete programs"> "Windows Installer"> "Internet tools", double-click it, and select "Internet Connection Sharing ", then, "OK", the system will install and configure the program for you.

Step 4. After "Internet Connection Sharing" is installed, the system will go to the "Internet Connection Sharing wizard" and select "Next ", select the "dial-up adapter" when selecting the "use when connecting to the Internet" Network Adapter. For ADSL, select "Efficientnetworksp. p. p. o. e. adapter). After "Next", select the NIC name of the Local Machine for "use when connecting to my home network", for example, "Intel21143based10/100 mbps ......", When you configure a disk, you can select "cancel". After "Next", the Internet Connection Sharing configuration is completed. Then press the prompt to restart the computer to share the notebook with multiple computers online.

The local machine performs shared Internet access settings on the slave machine

If your laptop needs to be connected to a local area network (such as an Internet cafe) with Internet shared access, that is, using a local machine as a slave machine or other clients), how can you set up a Mercury wireless router for Internet shared hosts? Step 1: Right-click "Network Neighbor", select "properties", and find the TCP/IP network adapter in the "network" dialog box that appears. Double-click "properties ". Select the "DNS configuration" item, tick it before "Enable DNS", and select a name from the host item, in the "DNS server search order" column, set the mercury wireless router as the address of the local ISP Server, for example, "61.139.2.69" Sichuan ISP), "add" and "OK.

Step 2: Select "specify IP Address" in "ip address" and set the IP address of the Local Machine to an address ranging from 1 to, for example, 192.168.0.2 or 192.168.0.119, in short, the ending number must be different from that of other computers on the LAN. The subnet mask is 255.255.255.0.

Step 3: Select "Gateway" and enter the IP address of the host in the "new Gateway" column, that is, 192.168.0.1, and then select "add". After you confirm, restart the computer and the shared host will access the internet. Through our detailed introduction above, do you have a comprehensive understanding of "online notebook technology? Finally, we wish you the best use of your notebook.