Application settings in DDN in 3C8832 vro

Use the computer ports and routers at the two ends of the cross-line that comes with the router itself to enter the settings on the computer's Super Terminal:

• Default value:

PATH1: LANPORT1
PATH2: ISDNPORT2, PORT3
PATH3: SERIAL1PORT4
PATH4SERIAL2PORT5

! <PORT> E. G! 1 represents 1 port, that is, the LAN port.

SETD = SETDEFAULT
CONT = CONTROL

In LOGIN: Enter root, password:

!

The root user can set the TCP/IP leased line.

• Process: The LAN port is allocated to you by the Telecommunications Bureau. For example, from 202.101.101.208-224, the first and last addresses are CIDR blocks and broadcast addresses, and the mask is 255.255.255.255.255.240 ..

The WAN port distribution address of the carrier is 202.101.102.188-191. We use 202.101.102.190 (if the carrier uses 202.101.102.189 for replacement), and the mask is 255.255.255.252. The settings are as follows:

SETD! 4-PORTOWN = PPP
SETD! 3-PATHLINETYPE = LEASE
SETD! 3-PATHCONT = ENABL
SETD! 1-IPNET = 202.101.101.20920.00000000240
SETD! 4-IPNET = 202.101.102.20.255.255.255.252
(Setd! 1-ripipcont = (talk, listen)
Setd! 4-ripipcont = (talk, listne ))
SETD-IPCONT = ROUTE
SETD! 1-PORTCONT = ENABLE
SETD! 4-PORTCONT = ENABLE

For INTERNET applications or special applications that require Static Routing, add a route table. enter MENU in the command line, select IP Option, select ROUTE option, select ADD option, and enter ROUTE information. for example, enter 0.0.0.00.0.0.0 on the INTERNET! 41 (target address, address mask, port 4, skip level 1)

• Use SH after cabling! 4-IPNET if the Status is up, the call is considered successful.

(If you set the default gateway of another single machine in the address CIDR block, you must PING the IP address of the router first and then PING the Local Area Network)