Arduino burns bootloader and downloads the program as an ISP

Note: The following processes are Pro Mini 328P on the other.

1 , upload the example on the first board Arduinoisp program, the board becomes the board A ;

2 , waiting to burn bootloader Board becomes the board B ;

3, BoardAthe pinPinTenConnecting the BoardBof theRST, and then the boardAthe pinPIN11, A, -connecting the board separatelyBof thePIN11, A,,to the BoardBpower on.

4 , Arduino IDE the Menu "Tools"-- > "Programmer"-- > " Arduino as ISP , in the Tools menu, select Burn the Boot program, if the wiring is not a problem, more than 10 seconds will be burned in the boot program.

Note: The specific pin meaning, depending on the different board.

Because in the Pro mini 328P, the Arduino bootloader does not support the watchdog, the watchdog reset will always be stuck in the boot program, need to power off the line, it is necessary to use the watchdog 328P under the time, you need to use the ISP to burn the program.

as a isp Downloader, give the board b with isp The way the downloader is programmed, using arduino IDE give no bootloader The board burning program, by selecting the menu "file"-"Upload by programmer", you can.

if not applicable Arduinoide To burn, you can use ISP download, directly to the board to burn *.hex files without the need to use Arduino IDE to write the serial port burn.

Burn Method :

Open progisp software

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/58/98/wKioL1S1QLWg0c25AAKSlMa0TcM776.jpg "style=" float: none; "title=" QQ picture 20150113235444.jpg "alt=" Wkiol1s1qlwg0c25aakslma0tcm776.jpg "/>

the transfer in Flash " Choose your own compiled *.hex file, click "RD" to verify ISP If the wiring is correct, if it is wrong, click "Automatic" to start burning.

650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/58/9B/wKiom1S1P-yS3kmDAAKwRkMw-4w384.jpg "style=" float: none; "Title=" does not name the picture. png "alt=" wkiom1s1p-ys3kmdaakwrkmw-4w384.jpg "/>

This article is from the "Big bro" blog, make sure to keep this source http://9662841.blog.51cto.com/9652841/1603735

Arduino burns bootloader and downloads the program as an ISP