1. Download the user manuals and reference manuals from the website, as well as the development kits: https://www.altera.com.cn/products/boards_and_kits/dev-kits/altera/kit-aiigx-pcie.html
2. Check the Development Board for Damage against the manual
3.
installing development platforms and driversQuartus Software: https://www.altera.com.cn/downloads/download-center.htmlSelect either the subscription version or the online version or you can download two versions (computers can be installed with different versions of the computer). recommended Download network version, the network version free of need to crack, because the order version needs to crack, and the crack does not completely lead to a lot of IPnuclear cannot be used, such as self-test network version of the FFT kernel can be used, and the cracked order version of the FFT kernel cannot be used.
Install driver: Development Kit does not have download line, need USB Type-b
? data cable or USB Blaster Downloader because the Development Board supports Both of these download methods. I use theUSB type-b
? data lines, compared to USB type-b
? The data line is cheap. Connect the PC and the Development Board with a data cable, turn on the power. After some time, open the PC Device Manager, the Universal Serial Bus Controller directory is more than AlteraUSBBlaster, right-clickUpdate the driver, select Browse your computer to find the driver software, then click Browse to select the pathX:\altera\12.1sp1\quartus\drivers, the installation can be completed.
4. The Development Board restores the factory settingfollow the manual to set the appropriate switch to the default state,
Burn write in the development package installation path under the factory program, X:\altera\12.1\kits\arriaIIGX_2agx125_fpga\factory_recovery, two SOFfileA2gx125_fpga_bup.sof andmax2.sof.Note: indo not click "Add File" under the Programer interface, otherwise the following error will appear:Click "Auto Detect", select the device corresponding model, then there will be 2 "none". Under the corresponding device, double-click "None", the file name is selected Choose the sof file you want, tick program/configure, and start
4. Detecting resources on the Development Board Open the installation path X:\altera\12.1\kits\arriaIIGX_2agx125_fpga\examples\board_test_system under BoardTestSystem.exe., appears under /c1>
Next, follow the Help section to detect config, gpio|, flash|, Ssram, DDR2, DDR3, HSMC, and Power Monitor, and the following are the detection scenarios
From for notes (Wiz)
Arria II GX FPGA opener Kit-Preliminary use
