ASP and Stored Procedure Analysis

Source: Internet
Author: User

There are a lot of articles about ASP and stored procedures, but I doubt whether the authors have actually practiced it. I checked a large amount of relevant materials at the beginning and found that many of the methods provided in them were not the same in practice. For simple applications, these materials may be helpful, but they are limited to this, because they are all the same, copy each other, and use a little more complex.
Now, I basically access SQL Server by calling the stored procedure. Although the text below cannot be absolutely correct, it is a Summary of practice and I hope it will help you.
A stored procedure is one or more SQL commands stored as executable objects in the database.
Definition is always abstract. The stored procedure is actually a set of SQL statements that can complete certain operations, but these statements are stored in the database (Here we only talk about SQL Server ). If we create a stored procedure and call it in ASP, we can avoid mixing SQL statements with ASP code. There are at least three advantages:
First, greatly improve efficiency. Stored procedures are executed very quickly, and calling stored procedures can greatly reduce the number of interactions with the database.
Second, improve security. If SQL statements are mixed in ASP code, once the code is out of password, it also means that the database structure is out of password.
Third, it is conducive to the reuse of SQL statements.

In ASP, the stored procedure is generally called through the command object. Based on different situations, this article also introduces other calling methods. For convenience, the following simple classification is made based on the input and output of the stored procedure:
1. Only the stored procedure of a single record set is returned.
Suppose there are the following stored procedures (the purpose of this article is not to describe the T-SQL syntax, so the stored procedure only gives code, not to mention ):

/* SP1 */
Create procedure DBO. getuserlist
As
Set nocount on
Begin
Select * From DBO. [userinfo]
End
Go

The above Stored Procedure Retrieves all records in the userinfo table and returns a record set. The ASP code for calling the stored procedure through the command object is as follows:

'** Call the stored procedure through the command object **
Dim mycomm, myrst
Set mycomm = server. Createobject ("ADODB. Command ")
Mycomm. activeconnection = myconstr 'myconstr is the database connection string
Mycomm. commandtext = "getuserlist" 'specifies the name of the stored procedure.
Mycomm. commandtype = 4 'indicates that this is a stored procedure
Mycomm. Prepared = true 'requires that the SQL command be compiled first
Set myrst = mycomm. Execute
Set mycomm = nothing

The set of records obtained by the stored procedure is assigned to myrst. Next, you can operate on myrst.
In the preceding code, the commandtype attribute indicates the request type. The values and descriptions are as follows:
-1 indicates that the commandtext parameter type cannot be determined
1 indicates that commandtext is a common command type
2. The commandtext parameter is an existing table name.
4. The commandtext parameter is the name of a stored procedure.

You can also call the stored procedure through the connection object or recordset object. The methods are as follows:

'** Call the stored procedure through the connection object **
Dim myconn, myrst
Set myconn = server. Createobject ("ADODB. Connection ")
Myconn. Open myconstr 'myconstr is the database connection string
Set myrst = myconn. Execute ("getuserlist",) 'the last parameter is the same as commandtype
Set myconn = nothing

'** Call the stored procedure through the recordset object **
Dim myrst
Set myrst = server. Createobject ("ADODB. recordset ")
Myrst. Open "getuserlist", myconstr, 0, 1, 4
'Myconstr is the database connection string. The last parameter is of the same meaning as commandtype.

2. Stored Procedure without input/output
See the following stored procedure:

/* SP2 */
Create procedure DBO. deluserall
As
Set nocount on
Begin
Delete from DBO. [userinfo]
End
Go

In this stored procedure, all records in the userinfo table are deleted without any input or output. The Calling method is basically the same as described above, but the record set is not required:

'** Call the stored procedure through the command object **
Dim mycomm
Set mycomm = server. Createobject ("ADODB. Command ")
Mycomm. activeconnection = myconstr 'myconstr is the database connection string
Mycomm. commandtext = "deluserall" 'specifies the name of the stored procedure
Mycomm. commandtype = 4 'indicates that this is a stored procedure
Mycomm. Prepared = true 'requires that the SQL command be compiled first
Mycomm. Execute 'you do not need to retrieve the record set here
Set mycomm = nothing

Of course, this type of stored procedure can also be called through the connection object or recordset object, but the recordset object is created to obtain the record set. If no record set is returned, use the command object.

3. Stored Procedures with returned values
When performing SP2-like operations, SQL Server's powerful transaction processing functions should be fully utilized to maintain data consistency. In addition, we may need to return the execution status of the stored procedure. For this reason, modify SP2 as follows:

/* SP3 */
Create procedure DBO. deluserall
As
Set nocount on
Begin
Begin transaction
Delete from DBO. [userinfo]
If @ error = 0
Begin
Commit transaction
Return 1
End
Else
Begin
Rollback transaction
Return 0
End
Return
End
Go

In the preceding stored procedure, 1 is returned when the delete operation is executed successfully. Otherwise, 0 is returned and the rollback operation is performed. To obtain the return value in ASP, you must use the parameters set to declare the parameter:

'** Call a stored procedure with a returned value and obtain the returned value **
Dim mycomm, mypara
Set mycomm = server. Createobject ("ADODB. Command ")
Mycomm. activeconnection = myconstr 'myconstr is the database connection string
Mycomm. commandtext = "deluserall" 'specifies the name of the stored procedure
Mycomm. commandtype = 4 'indicates that this is a stored procedure
Mycomm. Prepared = true 'requires that the SQL command be compiled first
'Declared Return Value
Set mypara = mycomm. createparameter ("return", 2, 4)
Mycomm. Parameters. append mypara
Mycomm. Execute
'Get the return value
Dim retvalue
Retvalue = mycomm (0) 'or retvalue = mycomm. parameters (0)
Set mycomm = nothing

In mycomm. createparameter ("return", 2, 4), the meanings of parameters are as follows:
The first parameter ("Reture") is the parameter name. The parameter name can be set arbitrarily, but it should be the same as the parameter name declared in the stored procedure. Here is the return value. I used to set it to "Reture ";
The second parameter (2) indicates the Data Type of the parameter. For details about the type code, see the ADO reference. The following describes the common type code:
Adbigint: 20;
Adbinary: 128;
Adboolean: 11;
Adchar: 129;
Addbtimestamp: 135;
Adempty: 0;
Adinteger: 3;
Adsmallint: 2;
Adtinyint: 16;
Advarchar: 200;

For return values, only integer values can be taken and-1 to-99 are reserved values;
The third parameter (4) indicates the nature of the parameter. Here 4 indicates that this is a return value. The value of this parameter is described as follows:
0: The type cannot be determined; 1: input parameter; 2: input parameter; 3: input or output parameter; 4: Return Value

The above ASP code should be the complete code, that is, the most complex code. In fact

Set mypara = mycomm. createparameter ("return", 2, 4)
Mycomm. Parameters. append mypara

Can be simplified

Mycomm. Parameters. append mycomm. createparameter ("return", 2, 4)

It can even be simplified and will be explained later.
For stored procedures with parameters, you can only use the command object to call (it can also be called through the connection object or recordset object, but I have not tried it ).

4. Stored Procedures with Input and Output Parameters
The return value is actually a special input parameter. In most cases, we use a stored procedure with both input and output parameters. For example, if we want to obtain the username of an ID in the user information table, there is an input parameter ---- user ID, and an output parameter ---- user name. The stored procedure for implementing this function is as follows:

/* SP4 */
Create procedure DBO. GetUserName
@ Userid int,
@ Username varchar (40) Output
As
Set nocount on
Begin
If @ userid is null return
Select @ username = Username
From DBO. [userinfo]
Where userid = @ userid
Return
End
Go

The ASP code for calling the stored procedure is as follows:

'** Call the stored procedure with input and output parameters **
Dim mycomm, userid, username
Userid = 1
Set mycomm = server. Createobject ("ADODB. Command ")
Mycomm. activeconnection = myconstr 'myconstr is the database connection string
Mycomm. commandtext = "GetUserName" 'specifies the name of the stored procedure.
Mycomm. commandtype = 4 'indicates that this is a stored procedure
Mycomm. Prepared = true 'requires that the SQL command be compiled first
'Declare Parameters
Mycomm. Parameters. append mycomm. createparameter ("@ userid", 3, 1, 4, userid)
Mycomm. Parameters. append mycomm. createparameter ("@ username", 40)
Mycomm. Execute
'Get output parameter
Username = mycomm (1)
Set mycomm = nothing

In the above code, we can see that, unlike the declared return value, five parameters are required for declaring input parameters, and four parameters are required for declaring output parameters. When declaring input parameters, the five parameters are: Parameter Name, parameter data type, parameter type, data length, and parameter value. When declaring input parameters, there is no last parameter: parameter value.

Note: When declaring parameters, the order must be the same as that defined in the stored procedure, the data type and length of each parameter must be the same as that defined in the stored procedure.

If the stored procedure has multiple parameters, the ASP code is cumbersome. You can use the with command to simplify the Code:

'** Call a stored procedure with input and output parameters (simplified code )**
Dim mycomm, userid, username
Userid = 1
Set mycomm = server. Createobject ("ADODB. Command ")
With mycomm

. Activeconnection = myconstr 'myconstr is the database connection string
. Commandtext = "GetUserName" 'specifies the name of the stored procedure
. Commandtype = 4' indicates that this is a stored procedure
. Prepared = true' requires that the SQL command be compiled first
. Parameters. append. createparameter ("@ userid", 3, 1, 4, userid)
. Parameters. append. createparameter ("@ username", 40)
. Execute
End
Username = mycomm (1)
Set mycomm = nothing

If we want to get the username with IDs of 1 to 10, 10 users, do we need to create 10 command objects? No. If you need to call the same stored procedure multiple times, you only need to change the input parameters to get different input parameters:

'** Call the same stored procedure multiple times **
Dim mycomm, userid, username
Username = ""
Set mycomm = server. Createobject ("ADODB. Command ")
For userid = 1 to 10
With mycomm
. Activeconnection = myconstr 'myconstr is the database connection string
. Commandtext = "GetUserName" 'specifies the name of the stored procedure
. Commandtype = 4' indicates that this is a stored procedure
. Prepared = true' requires that the SQL command be compiled first
If userid = 1 then
. Parameters. append. createparameter ("@ userid", 3, 1, 4, userid)
. Parameters. append. createparameter ("@ username", 40)
. Execute
Else
'Assign a value to the input parameter again (in this case, the input parameter and output parameter values that do not change do not have to be declared again)
. Parameters ("@ userid") = userid
. Execute
End if
End
Username = username + mycomm (1) + "," 'Maybe you like to use Array Storage
Next
Set mycomm = nothing

The code above shows that when you call the same stored procedure repeatedly, you only need to assign a value to the input parameter whose value has changed. This method has multiple input and output parameters, when only one input parameter value changes during each call, the amount of code can be greatly reduced.

5. Stored Procedures with return values, input parameters, and output parameters
As mentioned above, when calling a stored procedure, the order of declared parameters must be the same as that defined in the stored procedure. Note: If a stored procedure has both return values and input and output parameters, the return values must be declared first.
To demonstrate the call method in this case, we can improve the above example. The username of the user whose ID is 1 is obtained, but the user may not exist (the user has been deleted, and the userid is a self-increasing field ). The stored procedure returns different values based on whether the user exists. The stored procedure and ASP Code are as follows:

/* SP5 */
Create procedure DBO. GetUserName
-- To enhance the impression of "sequence", the following two parameters are defined in reverse order.
@ Username varchar (40) output,
@ Userid int
As
Set nocount on
Begin
If @ userid is null return
Select @ username = Username
From DBO. [userinfo]
Where userid = @ userid
If @ rowcount> 0
Return 1
Else
Return 0
Return
End
Go

'** Call a stored procedure with both return values, input parameters, and output parameters **
Dim mycomm, userid, username
Userid = 1
Set mycomm = server. Createobject ("ADODB. Command ")
With mycomm
. Activeconnection = myconstr 'myconstr is the database connection string
. Commandtext = "GetUserName" 'specifies the name of the stored procedure
. Commandtype = 4' indicates that this is a stored procedure
. Prepared = true' requires that the SQL command be compiled first

'Return value must be declared first
. Parameters. append. createparameter ("return", 2, 4)
'The Declaration Order of the following two parameters is also reversed.
. Parameters. append. createparameter ("@ username", 40)
. Parameters. append. createparameter ("@ userid", 3, 1, 4, userid)
. Execute
End
If mycomm (0) = 1 then
Username = mycomm (1)
Else
Username = "this user does not exist"
End if
Set mycomm = nothing

6. Stored Procedures that return both parameters and Record Sets
Sometimes, we need a stored procedure to return both parameters and record sets. For example, when using Stored Procedure paging, we need to return parameters such as the record set and total data. The following is a stored procedure for paging:

/* SP6 */
Create procedure DBO. getuserlist
@ Ipagecount int output, -- total number of pages
@ Ipage int, -- current page number
@ Ipagesize int -- number of records per page
As
Set nocount on
Begin
-- Create a temporary table
Create Table # T (ID int identity, -- auto-increment Field
Userid int,
Username varchar (40 ))
-- Write data to the temporary table
Insert into # T
Select userid, username from DBO. [userinfo]
Order by userid

-- Retrieve the total number of records
Declare @ irecordcount int
Set @ irecordcount = @ rowcount

-- Determine the total number of pages
If @ irecordcount % @ ipagesize = 0
Set @ ipagecount = ceiling (@ irecordcount/@ ipagesize)
Else
Set @ ipagecount = ceiling (@ irecordcount/@ ipagesize) + 1

-- If the requested page number is greater than the total page number, the last page is displayed.
If @ ipage> @ ipagecount
Select @ ipage = @ ipagecount

-- Determine the start and end records of the current page
Declare @ istart int -- start record
Declare @ iend int -- end record
Select @ istart = (@ ipage-1) * @ ipagesize
Select @ iend = @ istart + @ ipagesize + 1

-- Retrieve the current page record
Select * from # t where ID> @ istart and ID <@ iend

-- Delete a temporary table
Drop table # T

-- Total number of returned records
Return @ irecordcount
End
Go

In the preceding stored procedure, enter the current page number and the number of records on each page to return the record set, total page number, and total number of records on the current page. To be more typical, the total number of records is returned as a return value. The following is the ASP code that calls the stored procedure (the specific paging operation is omitted ):

'** Call the paging Stored Procedure **
Dim pagenow, pagesize, pagecount, recordcount
Dim mycomm, myrst
Pagenow = request ("PN ")
'Udf is used to verify the natural number
If checknar (pagenow) = false then pagenow = 1
Pagesize = 20
Set mycomm = server. Createobject ("ADODB. Command ")

With mycomm
. Activeconnection = myconstr 'myconstr is the database connection string
. Commandtext = "getuserlist" 'specifies the name of the stored procedure.
. Commandtype = 4' indicates that this is a stored procedure
. Prepared = true' requires that the SQL command be compiled first
'Return value (total number of records)
. Parameters. append. createparameter ("return", 2, 4)
'Output parameter (total number of pages)
. Parameters. append. createparameter ("@ ipagecount", 3, 2)
'Input parameter (current page number)
. Parameters. append. createparameter ("@ ipage", 3, 1, 4, pagenow)
'Input parameter (number of records per page)
. Parameters. append. createparameter ("@ ipagesize", 3, 1, 4, pagesize)
Set myrst =. Execute
End
If myrst. State = 0 then' is not retrieved, myrst is disabled.
Recordcount =-1
Else
Myrst. Close 'Note: To obtain the parameter value, you must first close the record set object.
Recordcount = mycomm (0)
Pagecount = mycomm (1)
If CINT (pagenow)> = CINT (pagecount) Then pagenow = pagecount
End if
Set mycomm = nothing

'The following records are displayed:
If recordcount = 0 then
Response. Write "no record"
Elseif recordcount> 0 then
Myrst. Open
Do until myrst. EOF
......
Loop
'Page information is displayed below
......
Else 'recordcount =-1
Response. Write "parameter error"
End if

For the above Code, there is only one note: To obtain parameters when both the record set and parameters are returned, you must first disable the record set and enable it when using the record set.

7. Return the stored procedure of multiple Record Sets
This article first introduces the stored procedure of the returned record set. Sometimes, a stored procedure is required to return multiple record sets. In ASP, how can we get these record sets at the same time? To illustrate this problem, add two fields in the userinfo table: usertel and usermail, and set that only logon users can view the two fields.

/* Sp7 */
Create procedure DBO. getuserinfo
@ Userid int,
@ Checklogin bit
As
Set nocount on
Begin
If @ userid is null or @ checklogin is null return
Select Username
From DBO. [usrinfo]
Where userid = @ userid
-- If it is a logon user, use usertel and usermail
If @ checklogin = 1
Select usertel, usermail
From DBO. [userinfo]
Where userid = @ userid
Return
End
Go

The following is the ASP code:

'** Call the stored procedure that returns multiple record sets **
Dim checklg, userid, username, usertel, usermail
Dim mycomm, myrst
Userid = 1
'Checklogin () is a custom function to determine whether a visitor logs on
Checklg = checklogin ()
Set mycomm = server. Createobject ("ADODB. Command ")
With mycomm

. Activeconnection = myconstr 'myconstr is the database connection string
. Commandtext = "getuserlist" 'specifies the name of the stored procedure.
. Commandtype = 4' indicates that this is a stored procedure
. Prepared = true' requires that the SQL command be compiled first
. Parameters. append. createparameter ("@ userid", 3, 1, 4, userid)
. Parameters. append. createparameter ("@ checklogin", 11,1, 1, checklg)
Set myrst =. Execute
End
Set mycomm = nothing

'Value from the first record set
Username = myrst (0)
'Value from the second record set
If not myrst is nothing then
Set myrst = myrst. nextrecordset ()
Usertel = myrst (0)
Usermail = myrst (1)
End if
Set myrst = nothing

In the above Code, multiple record sets returned by the stored procedure are obtained using the nextrecordset method of the recordset object.

So far, this article provides a comprehensive description of the various situations in which ASP calls the stored procedure. Finally, let's talk about how to call different methods of multiple stored procedures in an ASP program.
In an ASP program, it is feasible to call multiple stored procedures in at least three ways:
1. Create multiple command objects.

Dim mycomm
Set mycomm = server. Createobject ("ADODB. Command ")
'Call Stored Procedure 1
......
Set mycomm = nothing
Set mycomm = server. Createobject ("ADODB. Command ")
'Call Stored Procedure 2
......
Set mycomm = nothing
......

2. Create only one command object. When the call is completed, clear its parameters.

Dim mycomm
Set mycomm = server. Createobject ("ADODB. Command ")
'Call Stored Procedure 1
.....
'Clear parameters (assuming there are three parameters)
Mycomm. Parameters. Delete 2
Mycomm. Parameters. Delete 1
Mycomm. Parameters. Delete 0
'Call Stored Procedure 2 and clear parameters
......
Set mycomm = nothing

Note: The order of clearing parameters is the opposite of that of parameter Declaration. I don't know why.

3. Reset the parameter object using the refresh method of the parameters data set

Dim mycomm
Set mycomm = server. Createobject ("ADODB. Command ")
'Call Stored Procedure 1
.....
'Reset all parameter objects contained in the parameters Dataset
Mycomm. Parameters. Refresh
'Call Stored Procedure 2
.....
Set mycomm = nothing

It is generally considered that repeated object creation is a low-efficiency method, but after testing (the test tool is Microsoft Application Center Test), the results are unexpected:
Method 2> = method 1> method 3
The running speed of method 2 is greater than or equal to method 1 (up to 4%). The running speed of these two methods is much higher than that of method 3 (up to 130%). Therefore, it is recommended that when there are many parameters, use method 1 and method 2 when there are few parameters.

It took me a day to finally build up some of my superficial experiences in calling stored procedures in ASP. Some of them are the ones that I only know but do not know, and some may be wrong. However, these are all my own practices. You can accept it with criticism. I have different opinions. I hope you will give me some advice. Thank you first.

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.