Asus motherboard Bios settings tutorial, Asus motherboard bios tutorial

Asus motherboard Bios settings tutorial, Asus motherboard bios tutorial

At present, we are not very familiar with the motherboard in our daily life. Next we will briefly introduce some general settings of the motherboard BIOS. ------ (This article is the default task platform)

First, press the host power button and immediately press the DEL key to enter the CMOS settings (different models of the motherboard have different access methods. You can operate keys such as F2 and ESC as prompted on the page ).

Then, we can see the main UI of the BIOS. If the current display is in English, you can set it through the language bar in the upper right corner. (Note: If you want to retain the screen, you can insert a USB flash disk on your computer and press F12 to retain the current page image ).

On the home page, we can see the basic status of the current motherboard, such as time, CPU and motherboard temperature and voltage.

The system performance diagram below allows you to learn more about the motherboard.

There is a "boot sequence" column at the bottom, and you can drag the mouse to change the startup options. For example, we can adjust UEFI to the first place when using the USB flash drive PE tool to install the system.

 

20 how to create a USB flash drive Pe System Using Micro PE Tool

 

Click "advanced mode (F7)" and click "OK" on the displayed page ".

Go to "advanced options" to view options such as overview, advanced, monitoring, startup, and tools.

This section describes the BIOS information, version, CPU, memory, and date. We can perform regular upgrades Based on the BIOS version.

 

In the advanced options, you can click the "advanced power management (APM)" option to set the timed boot function of the computer. After entering, enable the RTC wake-up (this is the wake-up of the south bridge module, as long as the CMOS battery is powered on and the computer is powered on, you can wake up ).

In the "SATA Settings" in advanced options, you can change the hard disk mode. (Generally, it can be used when the system is changed. For example, XP generally uses the IDE mode, while Windows 7 and later use the AHCI mode ).

In the "advanced" USB settings, we can boot the USB mode as needed. If Port 3.0 or port is enabled or disabled, the identification mode of the south bridge xHCI is enabled.

In the "monitoring" option, BIOS can always detect the motherboard temperature, fan speed, computer, and so on.

You can set the boot speed of the motherboard, USB keyboard/mouse support, and so on.

The final "tool" is actually a BIOS update option. You can download the latest BIOS information from the official website, store it in a USB flash drive, and insert it into your computer for update.