Attaching USB devices to QNX

You apply the command
# Io-USB
Then, you should include "Removable device" in the "VM" under your VM menu"
Select "Connect" for the USB device you inserted in the listed devices, and a USB device insertion icon will appear in the lower right corner of vmare.
Now you can use
# USB
The type information of the USB device you inserted is displayed. It is very long and is not displayed by you.
USB 0 (uhci) v1.10, v1.01 DDK, v1.01 HCD
Control, interrupt, bulk, isoch, low speed
Next
# Fsys. UMass
In this case, the USB device name hdx and hdxtxx you want to mount will appear under/dev.
The next step is Mount.