avvcs7.0 How to use the vcs7.0 voice voice and text detailed tutorial

avvcs7.0 How to use? vcs7.0 Voice changer use tutorial. VCs is a very interesting voice-changer tool, can be real-time processing of sound, with more than 100 kinds of high-quality male and female pronunciation and rich sound effects, fully compatible with the general chat room, Internet telephony, chat programs and video conferencing software, the following small series to bring you the detailed use of software

Here, because I can not add video, I use pictures and text to help you solve. Mainly for the WIN7 system has been known about VCs and preliminary use of child shoes, so it will be less comprehensive. The latest voice changer, I will provide download at the bottom of the address for everyone to download. Here's a list of more than 10 more concerns, especially the Win7 system (XP) to answer:

　　Question 1: Download good software is not open?

Solution: See if you download the file size and the original is not the same, if not the same reason is not download complete. Download again.

If the download is the same size, it won't open. The reason is that the decompression tool is not installed. Direct next good pressure 123 can be solved.

　　Issue 2: The registration interface appears after the program is opened and cannot be entered.

Solution: Do not create shortcuts and desktops when installing. Open the VCS program directly from the download unpacked folder.

Issue 3: Open the following image

Solution: Select "Skin" option, then click "Vista7", as shown below:

　　Question 4: Open the sound bar also does not move, no sound, as shown

Note: This section is the most common and the solution is as follows:

Scenario 1: View computer Device Manager

Solution: This situation is to download the Voice changer is not installed after the driver. The driver is inside the folder. As shown in figure:

After the driver is installed, reboot the computer. Then point to open the file inside the 3rd step, start the program on it.

Scenario 2: If the situation 1 drives normally, there is no sound.

Analysis: The reason may be incompatible with the system

Solution: Locate the VCs startup program in the folder, right-click, and the Compatibility troubleshooter.

Then see the program being detected, as shown in the following figure:

Then select:

Next

And then next.

Then next

The final start of the program is OK.

Situation 3: The first two kinds of conditions are no problem, open the VCS or not move!

Analysis: It is most likely that you have installed 360 of related software, after most people's verification.

Solution:

(1) You know 360 of the various operations, modify the 360 monitoring settings, become a security item, light Point "allow" is not. or submit a security complaint.

(2) If you don't know how to set up, the easiest way is to unload all 360. Open the VCs and put them back. Then uninstall the problem and put it back.

(3) If this method is not enough, then only to the branch YY channel to find management to help you to solve.

　　Question 5: There is a serious repetition of the voice. (You can hear it two times)

Solution:

Turn this off. Get as shown in figure:

　　Question 6: After the VCs, the sound is small?

Solution:

(1) YY channel mixer, strengthen microphone.

(2) In the Control Panel to find audio management, in the microphone options, recording options after the decibel enhancement, point to 20 db.

(3) in YY channel mixer, advanced settings at the bottom, software amplification sound, can point to 6 times times, (more than 8 times times invalid)

　　Question 7: Speak loudly, and the sound of electricity is also big?

Solution: Find audio Management in the control Panel, in the microphone options, after the recording options are DB enhanced, point to the left 0 db.

　　Question 8: Is there a delay in singing?

Solution: This is for sure, according to the VCs ' voice-changer principle, the VCs are still unable to achieve nearly 0 latency. So it is suitable to speak and not to sing.

　　Question 9: Talking like a robot?

Solution: The location of the sound point cannot be too far up, as shown in the area below.

The following point is between 59-100, as shown here:

Also, point to this 48MHz.

　　Question 10: Can you adjust to the sound of about 20 years old?

Answer:

(1) Most people are OK.

(2) Because everyone's voice is different, some tune a little bit on it, and some in any case can not be transferred. Software is not a panacea. You need to work with it to get the best results.

　　Question 11: Can you make a good sound with someone else's voice file?

Answer: Listen to other people's voice is very good, many students want to bring over their own use. However, everyone's voice is different, others are not necessarily suitable for themselves. The best is to experience and debug yourself. And then tune up your voice. Do not want to be able to pull out a perfect maiden tone, transferred to nature, sound comfortable you can.

　　Question 12: Can I use VCS with an independent sound card?

Answer: can use, and the two match, the effect is better.

　　Question 13: Cannot use VCs in Internet cafes?

Solution:

(1) Internet cafes are generally equipped with a restore system, after the installation of a good driver, restart the computer will not be. So go to the Internet Café play can bring a U disk. Download the VCS to the U disk.

(2) Install the driver, install two times. The first time is to install to the C disk default directory. The second time is to build a disk inside the same directory as the C disk, and then the driver installed here. Then reboot the computer.

　　Question 14: How do I use VCs when I play CF and other games?

Solution: Simply select the VCS driver option in the recording device. Correlate well at both ends.

　　15: I would like to voice a voice, a moment to think of the original how to do?

Solution:

(1) in the VCs interface, there is a voice switch on the upper left corner. Turn it off when you want to change it.

(2) If you want to use the soundtrack to sing, it is best to turn off the VCs, restore yy settings.

Well, as long as you know where your problem is, there can be a corresponding method to solve. What other questions can go directly to the Guild to ask, or to the group inside, there are many people in.