Basic configuration and management of the Cisco PT Simulation Experiment (1) switch

Basic configuration and management of the Cisco PT Simulation Experiment (1) switch

Experimental Purpose : Master the basic configuration and management of the switch, and understand the basic commands of the switch configuration.

Experimental background : A company has a new batch of two-layer switch, before formally put into use to initialize the configuration and management, in order to maintain later.

Technical Principle :

• There are two basic ways to manage switches: in-band management and out-of-band management.

  • The console port management switch through the switch is out-of-band management, which does not occupy the network port of the switch, and the first configuration switch must be configured with the console port.

  • In-band management by means of Telnet, dialing, and so on (TCP/IP protocol).

• The command line operation mode of the switch mainly includes:

  • User Mode switch>

  • Privileged mode switch#

  • Global configuration mode Switch (config)#

  • Port mode Switch (config-if)#

Laboratory Equipment : switch_2960 1 units; PC 1; Configure line.

Experimental topology :

650) this.width=650; "Src=" https://s3.51cto.com/wyfs02/M02/9B/E1/wKioL1loUSCTOa4VAAAcI2Tky04250.png-wh_500x0-wm_ 3-wmp_4-s_4231014253.png "title=" 1.1.PNG "width=" "height=" 326 "border=" 0 "hspace=" 0 "vspace=" 0 "style=" width : 300px;height:326px; "alt=" Wkiol1lousctoa4vaaaci2tky04250.png-wh_50 "/>

Experimental Steps :

Enter privileged mode (EN)

Enter global configuration mode (CONFT)

Enter switch port view mode (int f0/1)

Return to ancestor mode (exit)

Return from the global following mode to privileged mode (end)

Help information (such as?, CO, copy?)

command shorthand (e.g. CONFT)

Command Auto-complete (TAB)

         interrupt test (CTRL + C

         back to privileged mode ctrl +z /p>

in privileged mode Restart switch (Reload)

Modify switch name (hostname X)

PC0 (under Super Terminal) switch>enable             // Enter Privileged mode switch#config terminal            // Enter configuration mode switch (config) #enable  password cisco1        // Set the plaintext password to Cisco1switch (config) #enable  secret cisco2           //set the encryption password to Cisco1switch (config) #hostname  S2960                 //Set the host name s2960s2960 (config) #interface  fastethernet 0/ 1        //Enter configuration mode S2960 (config-if) #exit                              //return to previous level mode S2960 (config) #ip  address 192.168.1.1 255.255.255.0     //Set Switch IPS2960 (config) #ip  default-gateway 192.168.1.254        //Set the default gateway S2960 ( Config) #ip  domain-name cisco.com                 //Set the domain name S2960 (config) #ip  name-server 200.0.0.1                 //Setting the domain name server S2960 (config) #no  ip  domain-lookup               / /prohibit Domain name resolution S2960 (config) #end                         //return to privileged mode s2960#enables2960 (config) #show  ?                      //help command prompt S2960 (config) #show  running-config       //display current configuration information S2960 ( Config) #show  mac-address-table            //Display MAC Address Table      s2960 (config) #write  memory               //saving the current configuration to the store

Lab Environment: Windows 7, Cisco PT 6.3

Reference: CCNA Study Guide (7th edition)

Basic configuration and management of the Cisco PT Simulation Experiment (1) switch