Basic experiment of information security system design three-20135227 Huang 201,352,140,000 Sub-benefits

Beijing Institute of Electronic Technology (BESTI)

Lab Report

Course: Information Security design System Basic class: 1352

Name: Huang Wanzihui No.: 20135227 20135214

Score: Instructor: Lou Jia Peng Experimental Date: 2015.11.24

Experiment level: Preview degree: Experiment time: 15:30~18:00

Instrument Group: Compulsory/Elective: compulsory test number: 03

Experiment name: Porting of real-time system

Experimental purposes and requirements:

1. Master uc/osii (UCLinux ...) Transplant procedure 2. Mastering the C language, compilation of mixed programming

Experimental instrument:

Name	Model	Number
Lenovo		1
Lab Box		1

Experiment contents, steps and experience:

Experimental steps:

(Configuration Environment)

1.0 Connect the Experimental box power, with the serial line, the line, the network cable, the Connection experiment box and the host 1.1 installs the ads (installs the file in the 00-ads1.2 directory, the Crack method 00-ads1.2\crack the directory) * Installs the originally installs the ads to uninstall first, then re-installs the side to be   Work.       1.2 Install the Giveio driver (install file in the 01-giveio directory) copy the entire Giveio directory to C:\WINDOWS, and copy the Giveio.sys file under the directory to c:/windows/system32/drivers. In Control Panel, choose Add Hardware > Next > select-yes i have connected this hardware > Next > Check-Add New Hardware Device > Next > Check Install I manually select hardware from List > Next > select-Show All devices >   Select-Install from disk-browse, specify drive as C:\WINDOWS\GIVEIO\giveio.inf file, click OK, install driver.   1.3 Install the JTAG driver (install files in the 02-uarmjtag2.0 directory) * use ARM9 when using.   1.4 Configure HyperTerminal: Baud rate is 115200, data bit 8, no parity, stop bit 1, no data flow control. 1.5 Test the basic installation is correct, refer to the document "03-Test document. doc", the test program in the 04-test directory this part carefully followed the experiment guidance, there will be no problem.

2. The problems encountered during the experiment and the solutions.

1) At the outset, we directly double-click the driver Jtag, also thought that the installation has been caused by the back of the effect. After following the instructions, there is no problem.

2) At compile time has not been able to OK, ask the teacher, the teacher said is JTAG driver installation problem, we opened the installation of the JTAG directory, found our computer installed three Jtag, we put the driver installed in the JTAG3, but the use of the default use of Jtag, Cause no way to proceed smoothly. The sine image will appear smoothly when the screen is modified.

Basic experiment of information security system design three-20135227 Huang 201,352,140,000 Sub-benefits