Basic knowledge of network protocols: SMTP protocol and UDP protocol

Source: Internet
Author: User
Tags requires

Commands and responses to the SMTP protocol

From the previous communication model, you can see that the SMTP protocol's session between sending SMTP and receiving SMTP is done by sending SMTP commands and receiving an answer to SMTP feedback. After the communication link is established, Send SMTP send mail command message sender, if receive SMTP at this time can receive mail then make OK answer, and then send SMTP continue to Issue RCPT command to confirm whether the message received, if received on the answer to OK, otherwise issued a refusal to receive answers, However, this does not affect the entire message operation. The two sides have been repeated so many times until the message is processed. The SMTP protocol contains a total of 10 SMTP commands, which are listed below:

SMTP Command Command description

Hello Identifies the sender to a Hello command to receive SMTP

Mailfrom: is the sender's address. This command tells the receiver the beginning of a new mail delivery and initializes all States and buffers. This command begins a message transfer process that ultimately completes the delivery of the message data to one or more mailboxes.

Rcptto: Identifies the addresses of individual message recipients

DATA

Receiving SMTP will treat the behavior that follows as mail data to . to identify the end of the data.

REST exit/Reset the current message transfer

NOOP requires the receive SMTP to do only the OK answer. (For testing)

QUIT requires that receive SMTP return an OK answer and turn off the transmission.

VRFY verifies that the specified mailbox exists, and because of security factors, the server suppresses this command more than once.

EXPN verifies that a given mailbox list exists, and that expanding the list of mailboxes is often prohibited.

Help What command does the query server support?

Note: The returns, wraps, and ASCII codes are 13, 10 (decimal), respectively. (Programming Entry Network)

Each command of the SMTP protocol returns an answer code, each of which has a specific meaning, such as the first digit of 2, the command succeeds, the 5 table fails, and the 3 table is not completed. Some of the more complex mail programs use this feature, first check the answer code first number, and based on its value to determine the next move. The following list of SMTP answer codes is as follows:

Answer Code Description

501 Parameter Format error

502 Command not implemented

503 Wrong sequence of commands

504 Command parameter not implemented

211 System State or system help response

214 Help information

Service Ready

221 Service shutdown

421 Service not ready, turn off transport channel

250 required mail operation completed

251 The user is not local and will forward to

450 The requested mail operation was not completed and the mailbox is not available

550 The requested mail operation was not completed and the mailbox is not available

451 abort the required operation; error occurred during processing

551 user is not local, try

452 system storage insufficient, required operation not performed

552 Excess storage allocation, required operation not performed

553 The mailbox name is not available and the requested operation is not performed

354 start the message input to "." End

554 operation failed

Several basic features of UDP protocol

(1) UDP is a connectionless protocol to transmit data before the source and terminal do not establish a connection, when it wants to transfer simply to crawl data from the application, and as quickly as possible to throw it on the network. At the sender, the speed at which UDP transmits data is limited by the speed of data generated by the application, the ability of the computer, and the bandwidth of the transmission; at the receiving end, UDP places each message segment in the queue, and the application reads a message segment from the queue each time.

(2) because the transmission data does not establish the connection, therefore also does not need to maintain the connection state, including the sending and receiving status and so on, therefore one server machine can transmit the same message to multiple clients at the same time.

(3) The header of the UDP packet is very short, only 8 bytes, and the additional overhead for TCP's 20-byte packets is small.

(4) Throughput is not regulated by congestion control algorithms and is limited only by the rate of data generated by the application software, transmission bandwidth, source-end and terminal host performance.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.