Basic Ubuntu Installation Tutorial

Source: Internet
Author: User

Transferred from: http://teliute.org/linux/Ubsetup/index.html

1. Go to Live CD desktop
1) Set up after startup, disconnect the network, and then restart the computer, you can start with the hard disk, can also be carved into a CD-ROM boot, mirrored:

After entering to find the blue link click Download, such as ubuntu-12.04-desktop-i386.iso,64 bit CPU can download AMD64 version: http://mirrors.sohu.com/ubuntu-releases/12.04/

WinXP hard Drive installation See: http://teliute.org/linux/Ubsetup/jichu0/jichu0.html
Win7 hard Drive installation See: http://teliute.org/linux/Ubsetup/jichu1/jichu1.html
Ubuntu HDD installation See: http://teliute.org/linux/Ubsetup/jichu2/jichu2.html

2) After starting a bit, the system automatically run, in the bottom out of two icons, you can click the ESC key to call out the menu item;
 
 
3) Wait a minute to enter a desktop, this is the trial Live CD desktop, the top left of the desktop has two icons, the upper right corner is the "Shut down" button;
 
 
4) for hard disk installation, click the Circle button in the upper left corner, and wait for the text box next to enter the letter ter and click the terminal icon below.
 
 
5) Enter the command sudo umount-l/isodevice then press ENTER, no hint is successful, close the terminal;
 
 
  2. Installation System
1) Double click on the desktop "Install Ubuntu12.04 LTS" icon, wait for a "welcome" panel, the left should be selected "Chinese (Simplified)",
If not, select it on the left, then click the "Continue" button in the bottom right corner.
 
 
2) The 2nd step is to check the preparation, require enough disk space, do not connect to the network, generally do not check the update and third-party software, direct point "continue" button;
 
 
3) Next 3rd step is to ask which partition to install, select the bottom "other options", click "Continue" button;
 
 
4) Next out of the disk partition situation, if you want to create a new partition and conversion partition can refer to the previous 7th, 13, 15, 16, 19 lessons, here is installed on an NTFS partition;
 
 
5) Click to select the partition you want to install, depending on the type and size of the partition, then click the "Change" button below;
 
 
6) In the dialog box, set the format for the partition EXT4, tick "format", on the "Mount point" to the right, select "/", click "OK"
Note that formatting deletes all files on this partition, so please back up important data in advance;
 
 
7) Back to the partition panel, check the partition editor, click "Install Now", if there is a/home partition, according to the original set, generally do not tick "format", only need to clear the configuration files in advance;
 
 
8) Below is the option to install the Grub boot, you can choose to install to/partition, then use Windows to boot Ubuntu,
If the prompt does not swap space, click "Continue", this is used for hibernation, size and memory of the same partition, generally do not use it;
 
When prompted to delete and format, ensure that important data has been backed up, point "continue";
 

9) Then go out and ask the area, click "Continue", or find your own area on the map, then the bottom has been installed;
 
 
10) Next is the keyboard layout, generally "Chinese", Direct point "forward" continue;
 
 
11) Next is to set their own user name (lowercase letters) and passwords, etc., from top to bottom in order to enter, and then click "Continue";
 
 
12) Then continue the installation process, you can look at the introduction of the system;
 
 
13) Wait patiently to finish, then come out a dialog box, click "Restart Now" to complete the installation, press the power button can also call out the shutdown dialog;
 
 
14) If it is a CD-ROM installation, a little hint to remove the disc, and then press ENTER, restart the computer, the installation is complete;
 
 
  3, connect the source of the net
1) After restarting, stop at a login screen, click on your user name, enter the password and press ENTER, enter the system;
 
 
2) After entering the desktop will come out a "incomplete language support" prompt dialog box, first do not close drag to the side behind to use;
 
 
3) First connect the net, find a network icon next to the keyboard in the upper right corner of the screen, aiming at the left click, select "Edit Connection";
 
 
4) for ADSL dial broadband connection to the Internet, on the right side of the dialog box, point the DSL tab, then click Add;
 
 
5) In the dialog box, first tick the top of the "automatic connection", and then enter the user name of the ADSL broadband user name,
In the following password, enter the broadband password, and then click the "Apply" button in the bottom right corner, enter the password in the Password box;
 
 
After you close the dialog box, wait a moment to prompt the network to succeed,
 
 
You can also restart the computer, and the command line can also use the sudo pppoeconf command;
 
  (below 6-7 is LAN, broadband users do not set)
6) If the LAN is on the Internet, in the dialog box, check the "Wired Connection1", click on the right of the "edit" button;
 
 
7) in the Out of the dialog box, select the IPV4 Settings tab, in the following method choose "Manual", then click the "Add" button below,
In the text box, enter the IP address, subnet mask, gateway, then press ENTER to determine, in the following DNS enter the DNS server address,
Check, click on the bottom right corner of the "Save" button, in the certification, enter their own password;
 
 
Back to the original dialog point "Close", wait a moment to the Internet, you can restart the computer;
 
8) After connecting the network first source, in the left of the Quick Launch panel click on the "Software Center" button, and then move the mouse to the top of the menu bar, point "edit-software source";
 
 
9) Under the source panel of the software, click the "Server in China" drop-down list and select "Other sites";
 
 
10) in the list of servers out, choose Sohu, 163 or Cn99 site can be, then click on the bottom right corner of the "Select Server" button to return;
 
 
11) Close the window, out of authentication, enter their own login password after the "authorization", if the update prompt, point "reload", waiting to complete the good;
 
 
For more information about setting up sources, see: http://teliute.org/linux/Ubsetup/lesson9/lesson9.html
 
  4. Update the system
1) Back to the beginning of the "Incomplete Language Support" dialog box, click "Now perform this action", if not found, click on the top right gear icon-system settings-language support;
 
 
2) If you are prompted with the "No Language information available" Panel, click on the "Update" button;
 
 
3) Then come out a Cache update dialog box, patiently waiting to complete, click "Details" to see the progress;
 
 
4) Then in the "language support not fully installed" dialog box, click "Install" to install the language pack;
 
 
5) Click the Close button to close the dialog box after the language pack installation is complete;
 
 
6) on the left of the Quick Launch panel, there will also be an Update button (the top labeled with a number), click to update the Manager window, or right-click "Update Manager";
  
 
7) in the bottom right corner of the window, click the "Install Updates" button, the left "settings" can also set the software source;
 
 
8) Next is to download and install, here patiently wait;
 
 
9) After the installation is complete, click the "Restart Now" button in the upper right corner to restart the computer, then you can start using it;
 
Other details: If you find that the Windows Startup menu item is gone, do not worry, the update is complete, if not yet in the terminal to execute sudo update-grub, or the original backup of the grub.cfg to find out, according to fill in;

Basic Ubuntu Installation Tutorial

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.