Beiyang Barcode Printer 2100e How to change the paper roll?

Beiyang Barcode 2100e Printer How to install paper roll, 2200e is the same operation Oh,

1, open the protection of the printer cover, press the right red line on the blue button, pop-up print Ribbon section.

2, take out the paper roll of the printer, the two sides of the cardboard removed.

3, according to the order shown in the diagram, the first one to insert a cardboard paper roll on the roll rod, in the roll of the paper roll into the roll, in the other cardboard into the roll of the reel, and must pay attention to make the paper roll and the paper paperboard on both sides have a certain gap, otherwise easy to clip paper.

4, in the paper roll, the paper roll from the Ribbon section of the following through, can not be in the middle of the Ribbon section through. You can refer to the two installation legends of the following figure.

5, the roll of paper to the front page into the print channel, the front page and the printer out of the paper mouth flush, in the use of left and right folder piece of paper pulled out of the paper as a clip.

6, finally, as shown in the picture, forcibly press the Ribbon section, you can normally use the printer.